开云体育

Reset all settings

• [MENU] 040, [MENU]
• Voice prompt confirms, "Initialization."
• Scroll up or down to ALL, press [MENU] to confirm
• The display asks, "Source?"
• Scroll up or down to ALL, press [MENU] to confirm
• The display shows, "Wait.."
• The display restarts and the radio has reset all options to factory default settings.

Change the voice prompt to English:

• [MENU] 014, [MENU]
• Scroll up or down to ENG, press [MENU]
• [EXIT]

Steve . . .


On Fri, 6 Oct 2023 17:50:33 -0400 (EDT), "Steve AI9IN" <skristof@...>
wrote:

I guess I'm asking how to get to the default and is it necessary to save the file as a csv file before reloading it back on the radio?

I have one myself but I've never reset it. Apparently, there are various things
you can reset on the UV-5R. Try these instructions:




=================================================================
How to reset a Baofeng UV-5R two way radio

Certain circumstances may require you to perform a reset on your Baofeng.
Performing a reset is extremely easy, however if you speak only English and the
voice prompts are in Chinese, performing a simple reset or recovering from one
may require a little more attention.

Follow the steps below to reset a Baofeng UV-5R, BF-F9, BF-F8+, UV-B6 or UV-82
two way radio from Buy Two Way Radios.

To perform a VFO Reset
1.Turn on the radio and press the MENU button.
2.Press the UP and DOWN arrow key to select RESET (Menu Item 40).
3.Press MENU to choose RESET.
4.Press the DOWN arrow key to choose VFO.
5.Press MENU. The radio will display SOURCE?
6.Press MENU to confirm. The radio will display WAIT... for a few seconds, then
beep twice to confirm reset is complete. The radio will revert to Chinese
language mode. Reset is complete.

To perform a FULL Reset
1.Turn on the radio and press the MENU button.
2.Press the UP and DOWN arrow key to select RESET (Menu Item 40).
3.Press MENU to choose RESET.
4.Press the DOWN arrow key to choose ALL.
5.Press MENU. The radio will display SOURCE?
6.Press MENU to confirm. The radio will display WAIT... for a few seconds, then
beep twice to confirm reset is complete.
7.The radio will revert to Chinese language mode. Reset is complete.

To set language from Chinese to English
1.Press MENU.
2.Press the UP and DOWN arrow key to select VOICE (Menu Item 14).
3.Press MENU to choose VOICE.
4.Press the DOWN arrow key to choose ENG.
5.Press MENU to choose ENG.

NOTE: a VFO RESET only resets the frequency values in VFO mode. To reset the
radio back to factory defaults, choose RESET/ALL. A reset may resolve some
issues, but will not resolve them all. Some scenarios, such as inoperability due
to an incorrect or corrupt image file cannot be resolved with a reset and
require another resolution. It is, however, usually a standard first step when
troubleshooting the radio.

=================================================================


Please go to the link for the original discussion about resetting this radio. I
suggest copying the text above and pasting it into a word processor, then saving
it in a convenient format, like PDF, so that you can share this in the future.


Donald KX8K



----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP

Hi, I'm new to the group. I searched the messages for this topic but didn't find anything.?
I am trying to get Dual Watch to work on my UV-5R. When I go to the Menu, it says the TDR is ON.
But when I try it the dual watch function is not working. I only hear the channel with the arrow. I have to push the A/B
button to hear the other channel.
I have tried programming it manually through the Menu and also using Chirp, but get the same result.
Any ideas or suggestions would be appreciated. Thanks!

Bill, I was amused by your comments regarding both Steve Jobs and SIR Clive Sinclair, simply because Steve Jobs made me very wealthy having bought stock at $18 a share and then having it go to $650 and do a 7 to 1 split, so was $92 a share and subsequently going to $175 a share. I also worked for Sir Clive Sinclair, way before he was knighted, in fact I remember that for a visionary it took him several attempts to pass his drivers license it was that far back :-).
--
Jeff - NZ2S

Not dumb, cheap. If you can engineer multiple things to flow through one pathway instead of 2, you save pennies.? Volume fidelity, tubes, transistors, generators or cars, even animals, are generally at their best at mid output. It's not ideal, but it's life.

But some volume-inclusive circuits will demand all or most of the output available to boost co-functions to tip 1's & 0 threshold levels. No doubt there are those who ascribe to Steven Jobs and those who follow Clive Sinclair. There's a song; "It's a mixed up ___ world."

But you're still right - It's funny... Even if you understand it.

Take my wife........
Please.

BillSF9c

Eric, I owe you an apology. I didn't see how adjusting volume could possibly matter but right around 50% seems to have done the trick (CHIRP).

It's the dumbest thing I've ever seen.

Thank you again.

Danny
K5CG

Tried, same result, in Chinese.

>Have you tried adjusting the volume of the radio? Too loud or too quiet and it will not sync.?

You're funny.

try this software

Have you tried adjusting the volume of the radio? Too loud or too quiet and it will not sync.?

?

More info...

I installed the CPS from the Radioddity site and it also does not work.
Settings -> Port COM1
Program -> Read form radio
Click Start
"hand shake..."
"failure!"?

My gut feeling is that the radio is defective. :(

First post here, hello.

I was gifted a UV-5RX3 and I am unable to get CHIRP (next) to read it. I have selected the Radioddity UV-5RX3 model and the correct com ports - which is either a real Serial port on COM1? or a pair of other USB Serial cables (COM5 and 6) I am able to use successfully for other radios (Kenwood TH-G71A and TYT UV-H88), I've even tried the Prolific Cable that came in the box and Windows 10 installed a driver for it, but it keys the transmitter, so it was uninstalled.

With the any of the serial ports I am getting a "Radio did not respond" error.

The Firmware on the display says BFS001 and I am aware that this may be meaningless.

SN: EU2016051503

Is it possible to test the serial communication with a terminal emulator? What serial parameters and possible commands might retrieve a response? If the serial port is plain dead then I'll have to program what I want added by hand (uggg).

Thank you
Danny, K5CG

--
Eddie Carroll
KD4BAS
Western KY USA

Thanks, Bob.

A1) Yes, I can hear the repeater with tone turned off.
A2) Yes, there is a nearby uncoordinated repeater on the same frequency that often breaks squelch but is weak signal and unintelligible.? It's the reason this repeater transmits a tone.
A3) This repeater is only about six miles away.? I can hit it with full quieting from my HT.? Receiving is also full quieting.