开云体育

Assuming the speaker volume is adjusted adequately, you should disable tone squelch.

I just bought the baofeng 5rh pro gps and when people key up the signal strength bar is at full but I never hear anything could someone plz helpe out

Just hold PTT and press the numbers on the keypad. Michael WA7SKG Paul Blundell via groups.io wrote on 1/18/25 23:12:

How do you send DTMF tones on the UV-17? I want to use it to access IRLP. Paul VK7AAL

It's still my only one so the belt clip works. But you've got me thinking. I usually as better prepare for ancillary goods. I think a fanny pack would be good. Home Depot has a few small tool bags w

Paul . . . <tanger32au@...> wrote: For me, it depends on what I'm "toting" somewhere. If it's just an HT, I toss it on the passenger seat or in the console between the car seats. If

I have just published my latest radio case on my blog: https://launcestonradiomonitoring.blogspot.com/2025/01/the-tassie-devil-radio-case-january.html How do you carry and store your gear?

I was able to read it, but it was tiny print. I re-set the group's photo attachment maximum size to 1024 x 1024 from 488 x 488 pixels. Next photo should display OK. What it basically said was that the

Did anyone get a res high enough for easier reading? Thx Nigel. It looks interesting .. BillSF9c

Hello again and thank you Donald for providing insightful links - appreciated. By chance whilst reading an article relating to fox hunting, I became aware of the importance of 'duty cycles' when using

Nigel . . . I can't say whether these two are the same radios. I own a pair of BF-888 radios. They work, and are programmable with CHIRP of RT Systems software. I don't know the full frequency range

Hi Baofeng group members :-) Just joined this group and a (suspect automated) 'welcome' note from Donald is the prompt for this note. Understand attaining 'critical mass' is important and although

Nick . . . <himself@...> wrote: I downloaded the user guide and searched it and there's no directions on how to do that. Below I will paste the instructions on how to reset a UV-5R model,

Any way to do this? Uploading a blank code plug is not a hard/factory reset. I want a radio exactly as it was when taken from the box. Cheers, Nick.

I have one of these too, and it works well, produces around 7.4 VDC at the terminals that connect to the transceiver when the input is 12 VDC. The only problem is with the label: the label states

A lot of interesting thoughts and suggestions. One of the issues is the varying supply voltages. In my truck and RV, I have 100Ah LifePo4 batteries running all the comm gear. With the chargers on

Did any of the other ideas sound plausible or do you think you're better off just using the adapter you have and play it safe? Donald KX8K

I didn't really mean to sound harsh. It's just that I'm looking for a specific answer to a specific problem and so many people feel a need to answer with something that has nothing to do with the

The Baofeng web site states that they work in cooperation with Chirp but I see no evidence of that at all. In fact, I see Baofeng radios sold by Radioddity that are supported by Chirp, but those same

I know I'm replying to an old post, but how did it go? I have all the equipment, and have most of the settings configured on the phone. I'm using a Baofeng uv82 since the 5 watts of the uv5r just