开云体育

Nothing happens. It doesn't even display the picture of the computer on the radio.

What happens when you use the chirp BF-F8HP model, as advised on the "Supported Radios" page? [email protected]> wrote:

I just received my UV-5RH, and I am not able to read or write from the thing. I've tried with both the T6UV and CHIRP software, but it always fails. Not only that, but I even bought two more

Thank you Bob, i will give that a try. 73 Brian

Brian, In general, regarding the RF path, I believe the same (but never really looked at it in detail), in that if VHF is working, then UHF should be working. So it does sound unusual that UHF tx is

A UV82 has come my way as part of a silent key estate. It transmits on 2m but not 70cm I’ve checked the settings to ensure it hasn’t been restricted, tried resetting and reprogramming, still no tx

This is what i get when i open the file up bud, i downloaded from the group incase the zip was corrupt, but all was fine,, weird one,, lol

Hi brian, I have no idea why you cannot open the files, I have downloaded them from the group and they open fine for me, see picture, the only other thing i can suggest is go to the radioddity site

Nothing opens up when I open these files Sent: Sunday, February 25, 2024 3:02 PM To: [email protected] Subject: Re: [Baofeng] Programming software communication issue Hi Brian, you have to download

Hi Brian, you have to download the file, but in case you cannot open .rar files here it is as a .zip file, windows should cope with that

Anyone know about using a UV5R as an echolink hotspot and specifically what cable are you using successfully with? the UV5R and PC. I have ordered a K2 cable that is also used for APRS from Amazon

Hi Brian, thats the one bud, the only other thing i can think of is that you have not installed the usb driver for the radio, find it attached,, i'm not sure which one you will need, so try both 64

I bought this one the other day and it doesn’t get recognized by computer etc. Is that the one u have shown below? B

Thanks Don for tips. I will do more work on this during the week. Let u all know findings. Brian

You are using the wrong cable, the baofeng DM-1701/1702/1801? all use a cable that is passive, there is no prolific chip or FDTI chip on the cable, the programming chip is built into the radio, you

Brian . . . <w2brm@...> wrote: This evening, I was thinking of asking you what type of cable you were using. You say it's Prolific, and that it's recognized. My first thought would be

Update. Was able to load the 2007 driver that allows the prolific cable to be recognized without error to computer. However, when I go to read from radio, it looks like it’s ready to work and says

I'm not sure where you do this in Windows, possibly in Device Manager, but if you assign a high number for the COM port for the driver, Windows won't reassign it. (Choose a number higher than 15.)

Thanks all. I don’t know anyone that may have older window versions, so will install the driver Colin provided. Where do I look for drivers to remove?? Is that also in remove and add programs??