开云体育

Here drawing using to make cross slide exstension. I am move the nut 1" [25.4mm] and making a longer screw. I simplified by not installing a power feed. I do not use power cross feed that mush. The

A little time spent internet searching will probably save a lot of shop time & give better results than just diving in. There are lots of wood threading tools around, both hand & router based. Since

> > mike allen > > 3:53pm > > I have a VOM with vacuum tubes in it tha tmy dad built after returning > from Korea . I built my first guitar amp with my dad , a Heathkit .I > helped him build color

Have any relatives living in Fresno or Clovis California? Dave

I have a VOM with vacuum tubes in it tha tmy dad built after returning from Korea . I built my first guitar amp with my dad? , a Heathkit .I helped him build color TV's for some of the family members

That'd be a #3 Morse Taper. On Tue, Jan 16, 2024 at 3:42 PM, Thomas Key<takey89@...> wrote: I have a Homier Speedway 7x10 mini lathe and would like to know what Morse taper the headstock has.?

I just took a look at my hi school , a few grades before me that school graduated Steve Wozinak & Steve Jobs . Looks like half the " electronics " classes maybe more? in their handout are at a

Using that technique, you could probably use an appropriately thick cutoff tool to cut the thread... ralphie

They're all #3 in the headstock and #2 in the tailstock. That's one of the nice things about the mini-lathes. The headstock taper is much bigger than you'd expect in a lathe of this size. Mike

"You can chuck an appropriate dowel and single thread it to start, but make sure what thread it is it might be some form similar to an acme thread. You may well have to grind your own threading tool."

I took a typing class in high school around 1991. My grandma wanted her grandkids to all learn because when my dad was drafted into Vietnam, he got an office job because he could type. Brian

"I remember one of the principals I worked for saying “those who can do, and those who can’t take shop.” He also sent his lots of his personal items down to us for repairs." I can't help but

I have a Homier Speedway 7x10 mini lathe and would like to know what Morse taper the headstock has. Tom

I don't have any personal experience, but I would think you'd want them to be a little on the loose side. Besides dimensional changes due to temperature, you also have dimensional changes due to

> > Groups.io > > 7x12MiniLathe Messages > > > > Re: minilathe for children. > > mike allen > > 11:10am > > 6L6 , 12AX7 , if a kid knows what those are for he's got a chance . Like > ya mentioned

I was a HS shop teacher from 1971-2008, in drafting, woodworking, plastics technology and a little metals. At my last school we taught plastics, wood, graphics, drafting, electronics, metals,

Absolutely ! heirge

A question arises "How precise do wooden threads need to be?" These are wooden Jogenson clamps? Bill

PS - I hope there are still instructors for such classes!

I think it would be good for the high school systems to reinstate a *modern* version of "metal shop" and "wood Shop" back into their curriculums. There are very few trade schools left in the country,