开云体育

Received with thanks.:) To: 7x12minilathe@... Sent: Thursday, 27 July 2017, 6:49 Subject: Re: [7x12minilathe] Painted Myself Into a Corner Again ? I I am now the proud possessor of a

Roy You get a folder size limit of 100 MB when you start a Yahoo group new. As the folders start to fill up the limit is automatically raised to 2 GB. (And possibly higher if needed). I own/manage 31

They're available through a moderator. That was a deliberate decision to avoid the problems the 7x10 group had with unmoderated access. At the time, Yahoo had file size limits, making it logical to

Mount the DI on the carriage, set up to indicate horizontally. Once you've got it turning true near the chuck, move the carriage to the end of the piece. If there's an error, slightly loosen the chuck

Hi grop I have now finished my Z-lock project for my LMS 4700 Mill. After advice from you I have done it in 2 ways. First an idea from Mikes Workshop

Yup, works. Not much to worry about there, Arthur. You have a great surface for the 4 jaw to hold on to. Go ahead and cut the piece off. Just make double sure by indicating once close to the chuck and

Hi Dick, I wholeheartedly agree, particularly regarding the photo and file section. Those are not as simple to abuse and easier to maintain. Simple maintenance pf those would be even less work than

Hi Michael, That worked great! I do have Google Drive but never used it. I'm going for it! Thanks for showing us. Dick

You Flickr photo post worked perfectly for me. I think all you need to do is place the dial indictor on the small hole you've already drilled for the tailstock 7x12minilathe@...> wrote:

That works nicely. Michael - California, USA Micro-Mark MicroLux 7x16 LMS 3990 Hi-Torque Mill with power feed _____ Sent: Wednesday, July 26, 2017 1:50 PM To: 7x12minilathe@... Subject:

Hi Mario, I belong to several yahoo groups and I believe most allow me to post my own photos, files as well as links to my own website. It sure is handy to have that flexibility. I have been a member

The new account worked great....and good photo too!! I stay with my original suggestion - part it, flip it, center it, drill it, and face it. You also have enough of the small area to indicate and

I I am now the proud possessor of a Flickr account. Trying again with a photo posted on that site (let's see if it works): https://www.flickr.com/photos/153053414@N05/35380935163/in/dateposted-public/

I've been using Google drive. It lets you have public and private folders. You simply pass along the provided link to the folder or photo you want to share. Very easy to upload photos and any other

There are many other sites. Even Google g-disk works. As does Apple iCloud drive. Neiter of them force the people looking at your photos to jump through any hoops THAT should be anyones first

Making the most out of Photobucket's woes. Any interest in having a group parallel to this one, mainly intended for uploads meaning pics and files? *7x12minilathePics-n-files

I have used google photos with good success and it does not give these problems. All I had to do was upload the photos and make the folder public.? Of course the best is the photos section on this

The real pain is all the past, non modifiable links already floating out there... If only we had the photo section available.... 7x12minilathe@...> wrote:

For myself, I find just a general file storage site works, something like Google Drive or Microsoft’s OneDrive (or whatever it’s called this month) might work for some. That’s mainly because I

Hi Dick,Thanks - I'll give it a look, All the best,Ian To: 7x12minilathe@... Sent: Wednesday, 26 July 2017, 13:28 Subject: Re: [7x12minilathe] Photobucket alternative. Was: Painted Myself