Re: Real Bull 7x14 lathe questions?
|
Hello Andy. As far as I am aware Real Bull ?as of 2 months ago did not produce a version with a brushless motor. Hugh at Amadeal will have the up to date info on this.
John L?| Spain
From: andyf1108
To: 7x12minilathe@...
Sent: Wednesday, February 6, 2013 9:49 AM
Subject: [7x12minilathe] Re: Real Bull 7x14 lathe questions?
?
I'd be slightly wary, Bob. Hitherto, Real Bull mini-lathes have all had two speed ranges with the usual hi/lo gears.
Of course, it may be that they have decided to produce a version with a brushless motor and no gearbox, to compete with the one Sieg have produced and which LMS sells as the Hi-Torque.
If there is a picture on Ebay,look for a nut on the RH end of the leadscrew and a rectangular saddle. Siegs don't have the nut, and their saddles are H-shaped.
Andy
--- In 7x12minilathe@..., "bob_guenthner" wrote:
>
> Anyone know anything about these? Found one listed for $650 on eBay. The description says variable speed and the seller says it has no high/low gear box. Just looking to see if there's anyone that knows anything about them.
>
> Bob
>
|
