On 02/05/2013 05:02 AM, Malcolm Parker-Lisberg wrote:
A constructive
criticism:
Bolt holes should be drilled with clearance so 0.06 mm
miss alignment will not matter, Bolts should not be used
for registration, this should be done with locating dowels
|
_
While I understand the need for accuracy in holes at times, I do use
dowel pins when things count.? Clamp the parts together and drill +
ream both at once.
--
Jerry Durand, Durand Interstellar, Inc.
tel: +1 408 356-3886, USA toll free: 1 866 356-3886
Skype: jerrydurand
