-----Original Message-----
From: 7x12minilathe@... [mailto:7x12minilathe@...] On Behalf Of Michael Jablonski
Sent: Monday, February 04, 2013 5:23 PM
To: 7x12minilathe@...
Subject: RE: [7x12minilathe] Which lube do you use

?

The South Bend "HOW TO RUN A LATHE" book is very old, but the practices still hold true today.

The copyright has run out on it long ago, so it can be reproduced at no charge.

I have a PDF file of the book which I can email to you if you are interested. It is a little over 3 megs.

Michael - USA

Micro-Mark MicroLux 7x16

-----Original Message-----
From: 7x12minilathe@... [mailto:7x12minilathe@...] On Behalf Of Ebner Heating Air Conditioning Co.
Sent: Monday, February 04, 2013 5:23 AM
To: 7x12minilathe@...
Subject: [7x12minilathe] Which lube do you use

?

Excuse me if this question has already been asked but I am curious as to what you recommend to keep cutting tools cool. Do you recommend a pump to flood the tool and material being machined, a mist coolant spray, or the old fashioned chip brush dunked in cutting oil? Most of my work will be done with aluminum.

?

Also is there any one book that stands out from the rest as far as lathe and mill practices that you might recommend to a newb?

?

No virus found in this message.
Checked by AVG -
Version: 2013.0.2897 / Virus Database: 2639/6080 - Release Date: 02/04/13