Re: Which lube do you use
|
Hi I would love a pdf of that file if you don¡¯t mind Don? zl1atb don@... ?
toggle quoted message
Show quoted text
From: 7x12minilathe@... [mailto:7x12minilathe@...] On Behalf Of Michael Jablonski
Sent: Tuesday, 5 February 2013 11:23 a.m.
To: 7x12minilathe@...
Subject: RE: [7x12minilathe] Which lube do you use? ? The South Bend "HOW TO RUN A LATHE" book is very old, but the practices still hold true today. The copyright has run out on it long ago, so it can be reproduced at no charge. I have a PDF file of the book which I can email to you if you are interested. It is a little over 3 megs.
Michael - USA
Micro-Mark MicroLux 7x16
-----Original Message-----
From: 7x12minilathe@... [mailto:7x12minilathe@...] On Behalf Of Ebner Heating Air Conditioning Co.
Sent: Monday, February 04, 2013 5:23 AM
To: 7x12minilathe@...
Subject: [7x12minilathe] Which lube do you use ? Excuse me if this question has already been asked but I am curious as to what you recommend to keep cutting tools cool. Do you recommend a pump to flood the tool and material being machined, a mist coolant spray, or the old fashioned chip brush dunked in cutting oil? Most of my work?will be done with aluminum. Also is there any one book that stands out from the rest as far as lathe and mill practices that you might recommend to a newb?
|
