开云体育

-----Original Message-----
From: 7x12minilathe@...
[mailto:7x12minilathe@...]On Behalf Of andyf1108
Sent: Sunday, December 09, 2012 5:58 AM
To: 7x12minilathe@...
Subject: [7x12minilathe] Re: 3mt to 3c adapter?


Hi Mert,

Yahoo does allow attachments, but doesn't check them for viruses, so for
safety's sake the 7x12 Group doesn't permit them.

I have taken the liberty of opening an album in the group's Photos section,
with the imaginative title of "Mert's Album", and have put your two pics in
it. I hope this is OK; if not, please say so and I'll delete it.

If you approve, and ever want to add any further pics, send them to one of
the moderators (John GadgetBuilder, Trevor Rymell or me) and we will then
upload them for you. Pictures have to be sent to a moderator for inclusion
in albums, to prevent anything unsuitable being uploaded.

Andy

--- In 7x12minilathe@..., "MERTON B BAKER" <mertbaker@...>
wrote:

Oops! Yahoo doesn't allow attachments, I'll have to resend it direct, off
list. Send me an email direct. >>mertbaker at verizon dot net<<
Mert



-----Original Message-----
From: 7x12minilathe@...
[mailto:7x12minilathe@...]On Behalf Of Exibar
Sent: Saturday, December 08, 2012 8:15 PM
To: 7x12minilathe@...
Subject: RE: [7x12minilathe] 3mt to 3c adapter?





Hi Mert!

Yah, that would be great if you wouldn't mind? The only thing I like
more than tools are making tools for myself ;-)



I found an adapter for $35, is that a good price? Maybe the reason I
like making my on tools is because I realy DON"T like the look my wife

gives

me when I buy them! LOL :-)



thanks!

Mike B



From: 7x12minilathe@...

[mailto:7x12minilathe@...]

On Behalf Of MERTON B BAKER
Sent: Saturday, December 08, 2012 4:18 AM
To: 7x12minilathe@...
Subject: RE: [7x12minilathe] 3mt to 3c adapter?





Wow! Boy, can I read that without my glasses! You can make a closer

and

drawtube for 3-C collets right on the 7x, if you want. I can send you pix
of the one I made.



Mert



-----Original Message-----
From: 7x12minilathe@...
[mailto:7x12minilathe@...]On Behalf Of Exibar
Sent: Friday, December 07, 2012 8:11 PM
To: 7x12minilathe@...
Subject: [7x12minilathe] 3mt to 3c adapter?

If I were to purchase this adapter:







from LMS to convert 3MT to 3C, what else would I need other than that
adapter?



I'd like to use a factory made 1/4" hex collet, and I can only find
them in 3c. which isn't too bad in cost, about $12. The adapter is $60,
which is a bit steep, but maybe workable with wife's permission..... I'm
just wondering if there is anything else that I'd need? the LMS site
doesn't have anything else on there :-(



anyone have one of the adapters they're not using and would like to
sell? :-)





thanks!

Mike B

------------------------------------

Yahoo! Groups Links