¿ªÔÆÌåÓý

  1. 7x12MiniLathe
  2. Messages
Single Messages Topics Expanded

Re: Mechanical Ring

Mark irrelevant
 

How about a single "tube", spin or press a lip the width of the ring gear on one end.? Blind drill and tap for the gear fixing screws.
Drop one ring gear onto the tube
Fit the "fixed gears"
Drop the top ring gear onto the tube
Spin or press the top "lip" to trap the top gear - if that lip extends beyond the width of the ring gear, machine down to size
? Just idle thoughts

From: Jerry Durand
To: 7x12minilathe@...
Sent: Saturday, 8 December 2012, 17:40
Subject: Re: [7x12minilathe] Re: Mechanical Ring

?

On 12/08/2012 09:36 AM, Ian 1 wrote:
Hi Jerry,

If they were bolted, they could not turn relative to each other.?

?Favour the press-fit idea

All the best
Ian

I may have missed something in the video, I was thinking the outer gear rings were separate gear rings sliding on the tubes.
--
Jerry Durand, Durand Interstellar, Inc.  
tel: +1 408 356-3886, USA toll free: 1 866 356-3886
Skype:  jerrydurand


Join [email protected] to automatically receive all group messages.