Thanks! ?Now I just have to get the lathe tuned up.
toggle quoted message
Show quoted text
On Thu, Nov 15, 2012 at 3:38 AM, mce600
<mce600@...> wrote:
?
--- In
7x12minilathe@..., Robert Schulke wrote:
>
> I'm looking for plans to make a small, useful steam engine on the
> mini-lathe. So far all the plans I've seen are either really small
> (1/2 inch bore), or require a larger lathe. One that could be put
> together from aluminum plate, pipe, bar, etc. would be great.
> Castings would be OK so long as they could be finished on the
> mini-lathe/mill. It should be able to produce at least 1 HP, and
> ideally 5 for powering a small launch.
>
> Thanks in advance!
>
Have a look here
