Yup! Several coats & pay particular attention to the edges.
Roy
toggle quoted message
Show quoted text
--- In 7x12minilathe@..., george curtis <gcvisalia@...> wrote:
i'm using 2 sheets of 3/4 mdf. so varnish, etc should be enough ?
thanks,
george
________________________________
From: Ward Miller <wardmiller@...>
To: 7x12minilathe@...
Sent: Thu, October 13, 2011 5:00:24 PM
Subject: Re: [7x12minilathe] lathe table
??
George, 3/4" MDF would work just fine.?? Seal it with several coats of varnish
first.
