In article <OOEBKAFCDAGNJFABEHBHIEDPHCAA.mertbaker@...>,
MERTON B BAKER <mertbaker@...> wrote:
Nope. The plug is pre drilled with the tap drill, and locked in place.
The tap is then run in from below, where the pre-existing threads are
undamaged, and thus will segue into the insert with no problem,
especially if it has been fitted correctly at the lower end.
Yes, you said that, which is fine, but then you said "thread the drilled
insert BEFORE installing it with loctite", as a "more elegant method",
which implied threading independently of the work. That is what I was
querying.
--
Stuart
