Contact the shipping company at once and make a claim against their insurance.? Sounds like the whole machine should be replaced for you.? If you delay or throw away packaging material, your claim will be very weak.
On Tue, Oct 11, 2011 at 7:51 PM, nissan.370z
<ebandit@...> wrote:
?
I just got my Grizzly 7x12 lathe and it is my first lathe ever. It was dropped during shipping on its side. the package was roughed up with a few gouges in it. The Styrofoam inside was busted up a little on the head end but was still there. the splash guard is lightly dented and the tray has a good dent in the back just behind the spindle. I will post a picture or two also.
What should I look for that could also be damaged? Can it be knocked out of true? I have no lathe experience and do not want to try and learn on a damaged lathe. If it is ok should I get new parts from them or demand a discount or what of anyone had experience with this sort of issue before from any company.
Any advice is greatly appreciated. I may test it out and inspect closer in the morning because they asked me too do that and call back with any other details. I have only opened the box and took pictures and marked the shipping info before signing it. Have not did a close inspection yet.
--
Bruce
NJ
