Hi,
I used this face plate:
For mounting my 5 inch chuck on my little lathe I had to measure and mill
slots for the chuck, but it worked fine for me. I could probably reduce
it's size but cutting the face plate and then smoothing it with a file
while it was turning on the lathe, but it works well the way it is. The
face plate is $12.99 plus shipping.
Jerry
toggle quoted message
Show quoted text
At 11:49 PM 6/2/2003, you wrote:
I could not find a suitable back plate on the HF web
site, but this one from LMS may work:
If you are interested in making your own:
Frank Hoose
--- kgmk99 <kgmk99@...> wrote:
I have a new Speedway 7 x 12 mini lathe. I want to
purchse the
Harbour Freigth tools 4" self centering 4 jaw chuck
(part number
47461-0VGA). the chuck requires a backing plate.
Does anybody know
which Harbour Freight Tools backing plate will work
with the self
centering chuck and the Speedway lathe?. I don't
want to do any
modification unless I have to.
Thanks,
George
------------------------ Yahoo! Groups Sponsor
To unsubscribe from this group, send an email to:
7x12minilathe-unsubscribe@...
Your use of Yahoo! Groups is subject to
__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
To unsubscribe from this group, send an email to:
7x12minilathe-unsubscribe@...
Your use of Yahoo! Groups is subject to
