Mike,
Not really, I have two different editions and they are pretty much
the same, except the CNC part.
Jerry
toggle quoted message
Show quoted text
At 08:43 PM 4/8/2003 +0000, you wrote:
--- In 7x12minilathe@..., Jerry Smith <jfsmith@a...>
wrote:
Mike,
You might want to get a copy of Machining Fundamentals
John R. Walker
I got mine on www.half.com for about $16.00, I found the companion
workbook
for $5.00 there also. Got lots of pretty pictures and high school
level tests.
You may want to find a semi retired machinist and offer to
sweep
his floors, after a bit, you will be invited to help in some really
amazing
things.
Jerry
Thanks for the tip. There are a ton of walker books available. Does
the edition matter. Thanks again.
mike
Yahoo! Groups
Sponsor<>
To unsubscribe from this group, send an email to:
7x12minilathe-unsubscribe@...
Your use of Yahoo! Groups is subject to the
<>Yahoo! Terms of Service.
