--- In 7x12minilathe@..., "Steve Claggett" <790racer@...>
wrote:
I appreciate you trying to find that. I want to turn some 20" small
dowel like wood that could be fed through the headstock and turn 2 to
3" at a time then move it out and do it again. there wouldn't be much
pressure against the tail stock.
I have seen a few sites, guys cutting and adding a bed extention. I
can't find my bookmarks right now, I'll keep looking. I think I would
upgrade to a 8X or 9X if I needed a longer bed than 14 inches.
--- In 7x12minilathe@..., "thornappleboots"
<thornappleboots@> wrote:
Is there a bed extention for the micromark 7x14 or plans somewhere
to
make one.
