FYI, check out the GrizHFMiniMill mailing list. I find it much more
useful then the minimill list.
toggle quoted message
Show quoted text
On 3/22/07, cedge11 <cedge@...> wrote:
Gregor
The Mini Mill sometimes proves to be a bit cramped for space and
travel. The Micro Mill, which is even smaller, would be very limiting
in what you would be able to do with it. I'd probably nudge you toward
the larger Mini Mill just to keep the predictable curses from scaring
small children. A bit more expense, but it's also a quite bit more
machine.
Steve
--- In 7x12minilathe@..., <gregorstransky@...> wrote:
Hi:
I just joined the group. I only recently became interested in home shop
machinery and have been doing some lathe work on my 7x12 Cummins. I
plan to
buy a mill in the near future. Does anybody have any experience with
the
HarborFreight Micro Mill/Drill that sells for $299? I already posted
the
same question to the mini-mill group, but received only a few
responses.
Thank you.
Gregor Stransky, San Antonio, Texas
Be sure to check out for small mills and lathes.
Yahoo! Groups Links
