--- In 7x12minilathe@..., "troyscon" <troyscon@...> wrote:
.....the cross slide dial on your lathe will be wrong. It
will say.002 when it is actually .001......
Well that confirms a mystery for me! The other thing that puzzled me
was that the "Forward" and "Reverse" label on the power switch is
backwards. I sort of *thought* the tool cutting edge was supposed to be
up where it could be seen. :-)
Another thing: My tail stock chuck will not eject. It's too short. I
note others are cutting them shorter. Hmmmmm?
I just stick a wrench between the chuck and the tail stock frame as a
wedge and eject it that way. David
