How in the world were you able to not only order an 8x12 from a HF
store, but use the 30% off coupon? I would have killed to have been
able to get an X3 from a local HF retail store with a 30% off deal! I
thought 8x12's and other non-store items (like the X3) could never be
bought through a store.
For a lot of 8x12 parts go to Lathemaster and call Bob, especially
a QCTP which you will want FOR SURE and only from Lathemaster as the
one from LMS is too small and needs modified to fit the 8x12. Be
careful about ordering anything from LMS for this lathe without
talking to Chris or getting more info as this lathe doesn't have alot
of available parts(chucks etc) that will fit without mods and
adapters. Also,the cross slide dial on your lathe will be wrong. It
will say.002 when it is actually .001 (check for picts of the
Lathemaster 8x14 on the net and you'll see).
toggle quoted message
Show quoted text
--- In 7x12minilathe@..., "rancerupp" <rupps@...> wrote:
Well, I OFFICIALLY went down to HF today and ordered my 8x12. Prices
in the mags are now $529, and in-store prices show $549. Well, I had
made previous arrangements to use the 30% off coupon so even though
it expired on Monday I was able to use it today. TTL out the door, it
cost $380.09. I think I'm gonna be happy with it. I did NOT get the
extended warranty, but I DO have a great big grin on my face. :D
I'm putting together what I want to order for accessories and other
bits. I'm currently looking at:
(LMS ____) 1 Sync Tooth belt (550m)
(LMS ____) 1 V belt (0-720)
(LMS ____) Steady Rest
(LMS 1198) Follower Rest
(LMS ____) Face Plate
(LMS 2346) 5" 4-jaw chuck
(LMS 2925) Dial Ind. Test Ind., Mag. base
(LMS ____) Knurling Tool
(LMS 1189) Live Center
(LMS 1246) Boring Bar Set
(LMS 1261) Accessory set
(LMS ____) Cut off tool (parting tool)
Do I need extras:
Extra Center Drills (LMS 1230)
Turning Tool Set (LMS 2412)
Any suggestions or missing LMS part #s would be appreciated. Thanks.
Rance
