---Pete,
Fast blow 1-1/4"X1/4". Check your machine, either 3A or 5A. Holders
and fuses available at Radio Shack, or any elect. supply, or good
hardware store, maybe even HD or Lowes. The hole in the control box
cover has to be enlarged slightly to fit the new holder. I used a
unibit. Just be careful not to crack the plastic. Solder on the
wires to the new holder, and you're done. 1/2 hour, tops.
Frank
In 7x12minilathe@..., "Pete Lilja" <plilja@...> wrote:
Excellent ideas - especially to all that suggested I change the
fuse holder. Seems easy enough.
Mine is a 5 amp GMA. Are these fuses fast blow, slow blow or
somewhere in betwixt? 8-)
Which American style fuse should I use? Or does it matter?
I didn't know there were metric fuses until this came up.
Pete
