开云体育

Hi All,

For those who might find it "interesting" – I noticed the motor of
the HF 8x12-14 was a tad warm and thought a check was in order.

With a motor and ambient temp of 65F the lathe was turned on – no
metal turning. The probe was located on the upper part of the motor
housing, between the motor body and the junction box.

Without noting all of the readings, in the course of:
13 minutes – temp rise 39.3F;
30 minutes – 49.7F;
46 minutes – 58.1F;
63 minutes – 63F – shut-down motor
66 minutes – 65.7F

I didn't run the motor unloaded yet.

So the motor runs hot - an auxiliary fan might be in order.

Take care,
DBN