On Sun, Apr 3, 2022 at 05:22 PM, <j_r_abercrombie@...> wrote:
The difference might also affect the size of tools that will still be able to be set at center height.
Using the stock tool post (which is the same dimensions for the 2 lathes - the MicroLux a Sieg, the Vevor a RealBull) here's a 12mm insert tool in the Vevor.
The brass height gauge is at spindle center height.
Here's the same 12mm tool in the MicroLux:
Microlux with 8 mm insert tool in stock toolpost:
