开云体育

Thanks! I look forward to it. And I’ve noticed all of the upgrade projects on different peoples’ lathe websites.

?

I noticed you use ProtonMail. Are you in Switzerland?

?

From: [email protected] <[email protected]> On Behalf Of Phil via groups.io
Sent: Thursday, March 31, 2022 4:34 PM
To: [email protected]
Subject: [EXTERNAL] Re: [7x12MiniLathe] New 7x12 delivered and on the bench.

?

WARNING: Email originated from an EXTERNAL source. Do NOT click links, open attachments or reply unless you recognize sender and know the content is safe.

Congratulations and let the cleaning begin!

If it is anything like mine was, you are going to find foundry sand in places you won't believe.

The chuck will definitely need to be taken apart, cleaned out and lubricated first thing.

Lots of cleaning in your future.

Then you can start in on the literally endless upgrade process.

Good luck and happy chip making.

?

Sent from , Swiss-based encrypted email.

?

Sent with secure email.

??

CONFIDENTIALITY NOTICE: This email and any attachments are for the sole use of the intended recipient and may contain material that is proprietary, confidential, privileged or otherwise legally protected or restricted under applicable government laws. Any review, disclosure, distributing or other use without expressed permission of the sender is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies without reading, printing, or saving.