开云体育

I have the Consew on multiple machines - my CNC and my Deckel clone:



On the one I have - the CS1000 - I know to reverse it you need to go
thru the set up menu.

Lot's of torque at any speed... nice and even


On 3/22/2022 10:25 PM, Jon Rus via wrote:
> Ralph,
> How do you like the motor performance? Do you have continuous
> (0%-100%) analog speed control? What did you do for your mounts and
> belt drive interfaces?
> .
> I was looking at this pretty closely
> Mini Metal Lathe 1 hp Servo Motor 115V 750W Kit 2 speed Grizzly Harbor
> Freight | eBay
> <>
> .
> .
> TIA for your thoughts
>
>
> On 3/22/2022 8:47 PM, Ralph Hulslander wrote:
>> I have the Consew Brushless 3/4
>> <>hp
>> motor on my lathe, my mill and my bandsaw and I have a spare.
>>
>> Ralph
>>
>> On Tue, Mar 22, 2022 at 8:16 PM mike allen <animal@...> wrote:
>>
>>? ? ? ? ? ? ?if you don't mind making a new motor mount you can use a
>>? ? ?treadmill motor & controller , that will give you variable speed .
>>
>>? ? ? ? ? ? ?animal
>>
>>? ? ?On 3/22/2022 3:23 PM, Johannes wrote:
>>>
>>>? ? ?Hi group
>>>
>>>? ? ?I have a 5200 LMS lathe, and I think the motor is gone.
>>>
>>>? ? ?It need a manual twist? to run and the motor make a lot of noise.
>>>
>>>? ? ?Sometimes ago the motor make a lot of noise, and I took out the
>>>? ? ?rotor.
>>>
>>>? ? ?The axel under the bearing was very worn, I did something and it
>>>? ? ?has worked ok until today.
>>>
>>>? ? ?A new LMS 4145 500 Watt Brushless DC motor will cost me 350/400
>>> USD.
>>>
>>>? ? ?So before I order, I ask my group :
>>>
>>>? ? ?*_is it possible to get a new motor that can replace and fit to
>>>? ? ?my 5200 lathe ?_*
>>>
>>>? ? ?350/400 USD Is nearly 1/3 of a new lathe? :-)
>>>
>>>? ? ?If someone have some experience with this motor or similar , you
>>>? ? ?are welcome to give me some advice.
>>>
>>>? ? ?Best regards
>>>
>>>? ? ?Johannes
>>>
>>>? ? ?Mexico
>>>
>>
>
>
>
>
>
>
>