Re: how to square vertical cutting table?
|
Lots of great tables in the photos section.? Best in my opinion is Kerrin Galvins one (in 'Kerrins saw modification') - jv
Hey John that was an awesome answer thank you. I have the older harbor frieght kinda greenish 4x6 bandsaw and LA cutting products bi-metal or m-42 and it's been ok but need to get a carbon blade also. I'm into knife making and would like to set up my saw vertical
to cut knife scales and tool steel annealed of course. Gotta make some kind of decent table.
Tab A
Get
I have a place in Reno that sharpens my big augar's after I hit to many nails along with my hole saw's . They also make bandsaw blades , though it's been a while . If your @ Reno Nv . Apex Saw works .
??? ??? animal
On 11/5/2022 3:36 PM, David Pidwerbecki wrote:
I buy the expensive blades from Harbor Freight and haven¡¯t ever had an issue. ? It was convenient to buy them-I was in the store for something else.? I bought a roll of blade and tried to weld my own by a but joint arc welder, but the
weld joints would fail over time. ? I think the radius is too tight on the 4x6, for I use the same welder for my 14x8 vertical bandsaw with no issues.
I built my own hydraulic down feed and use a 10-14 TPI blade.
|
John Vreede