First, I want to give credit to whoever I borrowed the design from, but too many years have gone by to remember their name.
?
I use my saw in the vertical position a lot. The table is big enough to use a 2 ?¡± drill press vice to hold small material or to clamp a fence for duplicate cuts.
For anyone interested, I had no drawings but used items found in my scrap box. The table is 6 x 6 x ?¡±, the stationary mount is 3 ? x 3 x ?¡± with the pivot edge fully radiused , and the two pivot anchors are 1 ? x ? x ? ¡±. There are two 5/32¡± dowel pins fitted into blind holes for the pivot action.
A small mill/ drill, or better, will make this a quick project.
??? ??? That is probably the coolest mod I have seen for one of these saws . Did you have an drawings or did you just go rogue ? Nice job , thanks for sharing .
??? ??? animal
On 4/1/2022 4:19 PM, Greg Gelhar wrote:
How about a table that converts from horizontal to vertical in one second? I pirated this idea many years ago and love it when needed.
