On 2/21/2022 6:19 AM, Joe Widmayer via groups.io wrote:
John,
It appears the horizontal bearings are cam followers and are not supposed to be taken apart.
Not to hard to find for the regular one but the eccentric may be expensive. I hoped to remove the eccentic on the shaft but it looks like it was peened at the thin part to keep it on: and, or may have been pressed on.? Not sure if it is removable without destroying it.
Yours are totally different from mine . Looking at your photos , I suspect the bearing is pressed onto the eccentric . If so , you won't get it off intact . A big c clamp , vise , or press with a sleeve pushing on the outer race should get them off .
--
Snag
My rights don't end
where your fears begin.
