¿ªÔÆÌåÓýThere are also some other part numbers, for the same spring, for older Jet saws. The Jet saws used to be made by Rong Fu, but that¡¯s been a while ago. You may get some other part numbers on ereplacementparts.com. They show a couple different ones on their site, but are 10-15 days out. ? Have you considered forgetting the spring, and installing a hydraulic downfeed? It¡¯s a far superior set up. Lots of info on home brew cylinder installations, on this site, youtube, and other places. I cheated, and bought a Grizzly 5 x 6 saw that came with one. One of the reasons I bought a Grizzly! ? I would have thought someone here would have a spring laying around, after they converted their saw to hydraulic. Of maybe you can get someone to measure the spring rate on theirs, and pick one up from Newcomb or Century, or maybe Lee. ? Bill ? From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Tuesday, February 19, 2019 10:57 AM To: 4x6bandsaw@... Subject: Re: [4x6bandsaw] Replacement spring for Harbor Freight saw ? ? Spring is out of stock at Grizzly for both Grizzly and Shop Fox. On to Jet! ? Well, I figured Grizz was the best chance, but there are others. There is also Jet, part number HVBS462-047 for their spring. Lot of Jet dealers out there. I¡¯d contact Jet directly. And Northern Tool, Item 122 on their 49464 band saw. They don¡¯t have part numbers, similar to Horror Freight. ? Busy Bee Tools, (Canada) Rikon model 15400 band saw, the spring is P15-400-127 Even Home Depot sells 4 x 6¡¯s, but they are not much on service parts. ? Bill ? From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
? ? Grizzly is out of stock for the 147 spring. I will try for the Shop Fox. Thanks for the info! ? Have you tried Grizzly? ? Part number for their spring is P0622147 for their G0622 saw. Or look at the Shop Fox, which Grizzly carries, spring part number X1715047, which is described as 22 x 4.5 x 215 extension spring¡.which gives away everything but the spring rate to look around for one. ? Bill ? From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
? ? I need a replacement spring for my HF 4x6 saw and HF doesn't have any in stock. Can anyone tell me what aftermarket spring could be used? ? McMaster Carr? ? Thanks Dave Bluffton SC
|
