开云体育

Hello Andrew, When I click on my weather station icon my weather data is nicely displayed in a window. How about the same format for weather stations other than my own and to allow each of these to

The BulletinBoard view will display any bulletins that you receive (i.e., someone on your RF channel or within your APRS-IS port filter has to send them). The retention period for all YAAC displays is

Thank you Andrew. Yes some of that was typo and most was just wrong on my part. I have made some changes ?so we will see what happens.? A couple more questions. Is it possible to populate the

Someone else is already forwarding those weather alerts from all the US NWS field offices to the APRS-IS backbone. What Dale is apparently trying to do is get those reports from his local NWS field

Soooooooo.. I have to have a little fun here as I am intrigued by this discussion. If I'm reading this right, we can take a Weather Alert and feed that to APRS via YAAC? If true, I want to learn

The difference between the APRS-IS port filter and the supplemental Tx I-gate filter is as follows: The APRS-IS port filter controls what extra comes _into_ YAAC from the APRS-IS backbone. The

Back when I was using UI-View I use to gate wx warnings to RF from 2 od my area NWS offices. UI-View had a special area to add stations you wanted to gate. I would put NWSDDC* and NWSGLD* in that list

You can delete the entire contents of some tables. For example, if you open the View->Local Objects table, you can choose File->Clear Table to delete every local Object. But there's nothing in-between

Once you have imported a POS file is there a way to un-import it too?? I have'nt found a way other than closing YAAC and restarting, or deleting each object individually. -- Mark Lindsey KD6AKC

Andrew, YAAC is beaconing thank you. ?How do I get it to digipeate? Then I am off and ready for the bike race. ?I have the course loaded and the all the reststops too. Tim

Typical no-beacon reasons: 1. The beacon record isn't enabled (on the Beacon tab in expert-mode configuration). 2. The RF port (AGWPE, Serial_TNC, etc.) is not configured for transmit-enabled. 3. The

Have you examined the files in YAAC/logdir ?

I running YAAC after a long while for the yearly bicycle event. ?I noticed when I select BCN after was able to update YAAC it will not transmit a beacon. I checked the normal suspects but cannot get

You have to run the upgrade through to completion. While running your old version of YAAC, choose the menu entry Help->Check for Updates. If it finds a newer version, it will see if your system allows

Andrew, I left off my icon file. [Desktop Entry] Name=YAAC Exec=/usr/bin/java -jar /home/pi/YAAC/YAAC.jar Comment=Yet Another APRS Client Icon=/home/pi/YAAC/images/yaaclogo64.ico Path=/home/pi/YAAC

Andrew, Yes, it is bike ride time again. ?I am trying to upgrade YAAC, and I have an Icon on my desktop to launch YAAC. ?Unfortunately, the icon does not call up the new software. ?How can I get

I presume you used the wizard to do your initial configuration. In that case, the wizard only pulls in around 100km radius of 1-degree tiles of map data; if that happens to be part-way across a tile,

Hello!? It looks like I have direwolf and the latest yaac set up correctly. no error messages.? i have configured both tcp-ip and agwpe ports and connected my HT via cable to the audio input/output

That "connect timed out" error says there is no AGWPE server (AGWPE, DireWolf, SoundModem, etc.) running at the port and non-local Internet address you specified in your port configuration. This could

hello! ?I wanted to use yaack and configure an agwpe port but got this error: I am using the most current version of yaack and java.? my os is windows 10. can someone help me out here? vy 73 David