开云体育

Hello everyone, name is Scott, Call is kc8kbk, been a ham for years and just now getting into APRS. Does anyone have configuration instructions to connect a Kenwood D72 to YAAC? I’ve tried following

Roger that. Thank you Andrew I didn’t think I read that wrong. I’ll be watching for the next release. Keith, WA0?TJT Author: https://net-control.us ARRL ARES Communicator Level 2, AEC for Platte

There is an APRS gateway to WinLink which allows you to send small messages through APRS to WinLink. However, the YAAC code for accessing that gateway is currently broken, and I'm working on fixing

Don’t get mad but are you saying YAAC can run inside of WinLink? Or are you saying YAAC is aware that WinLink is running on the same PC? Or if you are saying I have to download and install YAAC then

One needs to download, install, configure and run the program from http://winlink.org/ ... Use the "Messages" pull-down menu from within the program.

This document https://www.ka2ddo.org/ka2ddo/YAACdocs/messagemenu.html#WinLink says "The WinLink message window ..." But I can't find the WinLink message window? Where or how do I display such a thing?

You're welcome! -- Cheers and 73 - Jon N7UV

The View>Aircraft list/table shows many dozens of a/c updating at intervals of 0-1 second. I'm fairly sure that it's not due to dropped or discarded packets. My point was about the somewhat random

Thank you for pointing this out. I used to allow people to download the plugin distributions manually from the website by hyperlinks here, but I noticed in my web server logs that the vast majority of

Duh. The easiest thing was the most obvious. I went to View>Layers>Show Dead Reckoning and turned it off. My bad. -- Cheers and 73 - Jon N7UV

I actually noticed this some time back, but forgot to ask about it. The instructions highlighted in yellow suggest that there are links for each of the plugin names. However, at least on my Chrome and

Hi Andrew - Thanks for the info. I went to port setup and dialed it down to 1 min, and that seemed to help. My mobile ADS-B setup is fairly sensitive. I don't worry about random a/c at extreme range,

Greetings. The ADS-B timeout parameter is in the port configuration panel for that port type. It's a control that allows you to set a time between 1 to 60 minutes. So go to File->Configure->Expert

Thanks for the update, Andrew, especially for the attention to ADS-B. In searching through the new version, I haven't located the part about " 11. in the ADS-B plugin, set the inactive station time

next beta build#198 of YAAC ("Yet Another APRS Client"), created 2024-May-21 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or https://sourceforge.net/p/yetanotheraprsc changes and updates

Just to be clear, you don't need a hardware TNC - only the soft TNC as Andrew pointed out. The DigiRig connects and talks to the radio, The soft TNC talks to the DigRig, and YAAC talks to the soft

Thank you all for your replies. I did not realize I needed a software TNC as well.? I will work on this. Again, thank you ! 73 Eric

More than that, it also does CAT data on the same COM port. But yes, still needs a TNC. 73 Danny, K5CG HH 550-000-0609 SKCC 14257 To: "yaac-users" <[email protected]> Sent: Sunday, May 5, 2024

Bear in mind that a DigiRig is not a TNC; a DigiRig is a sound card interface to a radio, with a serial port used solely for PTT control. You will need to run some sort of software TNC program to use

I have Windows 10 Pro using a DigiRig on an IC-7000. 73 Danny, K5CG HH 550-000-0609 SKCC 14257 To: "yaac-users" <[email protected]> Sent: Sunday, May 5, 2024 9:58:59 AM Subject: [yaac-users]