开云体育

Greetings. A Kenwood TH-D72 in Packet mode is a TNC2-compatible TNC, which (as you noticed) starts in TNC Command mode (not KISS mode). However, YAAC only uses KISS mode. So, you must tell YAAC to

Greetings. Did you tell YAAC to _use_ the GPS data in your beacons? By default, this is disabled, because not all YAAC stations have a GPS (and use fixed location instead). Because YAAC will not send

Hi all, I installed YAAC on my Ubuntu and connected my TH-D72 with the USB cable to the computer. Using Putty, I can connect to my TH-D72 via /dev/ttyUSB0 and I am able to send commands to the HT,

I've tried a search but haven't been successful. Running Ubuntu on a Ryzen 5 laptop. Running Linux Mint on a Pentium. Same issue on both. Attempting to run as a mobile station with either computer,

Good stuff. I also use ariss.net & search for your call. ?___ Sent from my two-way wrist watch 73 de W3AB/George ?

You might want to define what the "same fate" means. Are you not seeing your own weather data, or are you talking about not being digipeated by local digipeaters? Have the two of you ever looked at

Hi Andrew I think I have the answer. I changed radios. The original is an old Midland that has served me well for many years. It has a fixed output of 25 watts. The radio I am now using has an output

Well, to me, aprs.fi is showing VE2EP-1's weather data, but his raw packets do seem to be missing the field that documents the weather station hardware (Peet Bros, Davis, etc.) in the weather

HI Andrew I am the "neighbour" that Ian refers to -? VA3JLF-1.? And my yaac map shows the correct weather for both my and Ian's stations.? I understand your explanation of the different paths and

Ah, you have fallen into the misguided and incorrect assumption that you can use aprs.fi for propagation analysis. You cannot do this, because the APRS-IS explicitly does not report _every_ packet

Well, the my last 34 beacons were digipeated by ve3uel according to aprs.fi, which is approx. 50 kms from here and one from ve3pec which is approx.. 10 kms away. Va3pec is not a particularly busy

The first question I would ask is "How do you know the nearest digipeater is ignoring your signal?" What evidence do you have to support that statement? James VE6SRV

That's peculiar. Why would the local digipeaters be ignoring your packets? Wrong digipeat path? Non-standard frequency? Or did they blacklist you for some reason? And you can't hear the distant

Thanks for the reply Andrew. RF only. The nearest digipeater ignores my signal but a distant one picks it up and sends it to an igate. Actually there are three digis quite close and they all ignore

Are you using RF on your station or just an Internet connection? Bear in mind that YAAC only reports _received_ station information, and APRS-IS never sends your own station's packets back to your own

YAAC version 0-beta 196 (17 Feb 24) on a RPI 3 All is well in the outside world. Station and weather seen on YAAC map of my near neighbour. APRS.FI is also correct. My local map is showing all the

I should add that YAAC is outputting the data string though a USB to a 8 port RS-232 hub. --- Ciao baby, catch you on the flip side 73 de W3AB/GEOAFA9GB WA2LSI, KE6RJW, W6B, W7B,?AAR9AG

So is YAAC, kinda. I'm trying to push the Davis Vantage Pro+ WX station data into a KPC-3+ TNC using Weather Display through YAAC. I can see the station on CWOP and Weather Underground. So I know it

OK, never mind! I found that the YAAC window was moved up out of range of the display. Fixed it!

Oh! And I can't grab the dialog box by the title bar and move the window around either.