开云体育

Hey guys, Im new to aprs and am hoping to get this running for a backpacking trip in two months. I have both direwolf and yaac able to Rx aprs packets and the gps coordinates through usb dongle. I

I rebooted again and now it is working, no red port and port name error. Don't know what happened different. No transmit yet, but not sure where that problem is, probably messed up the mod on the

Digging out a Quadra I used previously for a presentation on APRS. I am running Direwolf and YAAC. I am using a cheap CM108 sound dongle with the PTT mod. It was receiving, but no indication of

Thanks, Andrew. Guess I just never noticed it before. Michael WA7SKG Andrew P. wrote on 2/26/24 10:10 AM:

The appendage is the message sequence number, indicating that your station is expecting an acknowledgment from the recipient. Note that the number is increasing with each subsequent message, so the

I am testing using APRS for POTA spots. TO: POTAGW Via: MSG: WA7SKG K-TEST 146.520 FM VIA APRS Over the air, the message says "VIA APRS{m000b" Subsequent messages have appended {m000c, {m000d, {m000e,

Since you're using a TNC connected through a USB serial port, the port would probably be named /dev/ttyUSB2. Most computers these days no longer have the legacy PC motherboard serial ports that

Andrew, Thank you for the suggestions, especially about the sample plug-in. I have installed YAAC under Ubuntu 22.04 in a linux container in Windows 11 and it is receiving and displaying stations from

Well, the speech synthesis part works very well with the espeak software (though sometimes annoying if your APRS-IS filter is open too wide :-). You can use that as an interim until I get the .wav

Rats. I've been fooling with this for 2 weeks (first messages sent 2/7). At least (so far) it may not be something I was doing wrong. As I have my home APRS up 24/7 on its own screen, I don't always

Yeah, there's a bug in that code that I am currently troubleshooting (hence how I found the case sensitivity). Stand by for a new build with a fix. Andrew, KA2DDO author of YAAC

That's where I wasn't paying attention. Should have thought of that. The files I was testing with all had .WAV. Changed them to .wav and they all showed up and allowed selection. On the config page,

Have you tried using ".wav"? The code in the plugin checks for lowercase file types. Also, which audio file type do you have selected in the file chooser dialog? If, for example, it was set to look

I'm trying to get an alert when I receive an incoming message. I have installed the YAAC Sounds plugin. When I go to the Sounds tab to configure, I set the Event Type= Message To, Action=Play Sound,

Greetings. YAAC isn't presently set up for precisely what you are doing. It does have the following options, none of which seems to exactly match your needs, but maybe one is close enough, or will

Russ I do not know but I am going to forward this to Andrew the developer of YAAC and see what he has to say. Andrew: Russ is the head of our local APRS group and needs the following answered. Can you

I had an odd occurrence this morning. I was checking into APRSThursday and it appears that my station transmit i-gated the ack meant for my own station. At least I think that's what I'm seeing here.

Thanks Andrew, this is awesome. Carl.

next beta build#196 of YAAC ("Yet Another APRS Client"), created 2024-Feb-17 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or https://sourceforge.net/p/yetanotheraprsc changes and updates

I'm trying to get an alert when I receive an incoming message. I have installed the YAAC Sounds plugin. When I go to the Sounds tab to configure, I set the Event Type= Message To, Action=Play Sound,