开云体育

I am using YAAC 1.0 beta on my Raspberry Pi.? ?It has been working fine for the default configuration but I am trying to create a alternate configuration for mobile use. At the command line I am

Let's take a look at your problem. Re: timing: that is entirely possible. Are you receiving the QRU response directly or via a digipeater? If the latter, how long do you wait before querying again? I

Hey everyone I have a quick question to see if anyone else has experienced this issue before I file a bug. I have a simple setup with YAAC using kiss over ip connected to Direwolf on the same system.

Now that drones are required to transmit RemoteID, kind of like ADS-B and AIS systems, anybody know how to receive these and may there be any plans to include it in the APRS display? IIRC, there are

I just upgraded on Sonoma 14.2.1 with no issues. I’m using Liberica Full JDK v20.0.2. (Another app I use, sdrtrunk needs that.) Carl.

OK, I just tried upgrading YAAC on my Mac (x86 running Sonoma 14.1.2). No problem. So I'm guessing something strange with the Java runtime on the M2 (ARM) processor, or a new security "feature" in

That's very weird. Did you start YAAC the way you always start it, or did you let the upgrader start it post-upgrade? If the latter, close it, and start it the way you usually do. The upgrader has to

Oh boy! Not a good start for me. I clicked the usual way of doing things and asked YAAC to download the new version. Then open it, the only thing that opened was the main window with no maps, and no

next beta build#192 of YAAC ("Yet Another APRS Client"), created 2023-Dec-29 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or https://sourceforge.net/p/yetanotheraprsc changes and updates

Andrew, First thank you for replying. And the answer to your first two questions are yes and no. The grid squares that I have noticed with the blue conditions are (these are coordinates with in the

Andrew, You are correct and I will change to the Yaesu cable. ?I need to get dire wolf working on my M1 Mac to have this work like I would like. Tim KM4ESU

Greetings. It sounds like you're viewing an area of the YAAC-imported OpenStreetMap data where there are some errors in determining ocean boundaries. Per chance, have you: 1. imported the OSM data

Hello, ??????I have a couple of questions. 1. Why are some of the grid squares shaded blue? And can they be removed? 2. How do i correct heap limit errors?

What operating system / audio interface software are you using?

Actually, it's not strange at all. All of those YAAC port drivers you specified in your emails are meant to use a serial port to talk to a hardware TNC, such as a TNC-2 or what is built into the

Hi Tim, The Digirig relies upon RTS to PTT the radio (I cannot remember if its -RTS) how are you setting up the PTT? Also, I've found that RFI getting into the USB line can lock up some devices though

Hello, I am using the Digirig with my FTM-400 and YAAC. ?I can't get any data to flow from the FTM-400 and YAAC. ?Ideally, it should send the APRS data out to the Audio port of the Digirig. ?That

Greetings. Part of the problem here is that fldigi doesn't _stay_ in KISS mode. It vastly prefers being in ARQ mode, and switches back to it when a KISS connection is closed. So you will have to

Greetings, I've got fldigi configured to listen on port 8001, TCP/IP, Listen/Bind, Auto Connect/Retry. In YAAC, I configure a KISS-over-TCP port, localhost, 8001. Sometimes when I save the port it

Vicinity plotting isn't disabled on a per-station basis after-the-fact. It is part of the before-the-fact overall configuration of your YAAC station (and is a saved part of the configuration so you