开云体育

You might want to define what the "same fate" means. Are you not seeing your own weather data, or are you talking about not being digipeated by local digipeaters? Have the two of you ever looked at

Hi Andrew I think I have the answer. I changed radios. The original is an old Midland that has served me well for many years. It has a fixed output of 25 watts. The radio I am now using has an output

Well, to me, aprs.fi is showing VE2EP-1's weather data, but his raw packets do seem to be missing the field that documents the weather station hardware (Peet Bros, Davis, etc.) in the weather

HI Andrew I am the "neighbour" that Ian refers to -? VA3JLF-1.? And my yaac map shows the correct weather for both my and Ian's stations.? I understand your explanation of the different paths and

Ah, you have fallen into the misguided and incorrect assumption that you can use aprs.fi for propagation analysis. You cannot do this, because the APRS-IS explicitly does not report _every_ packet

Well, the my last 34 beacons were digipeated by ve3uel according to aprs.fi, which is approx. 50 kms from here and one from ve3pec which is approx.. 10 kms away. Va3pec is not a particularly busy

The first question I would ask is "How do you know the nearest digipeater is ignoring your signal?" What evidence do you have to support that statement? James VE6SRV

That's peculiar. Why would the local digipeaters be ignoring your packets? Wrong digipeat path? Non-standard frequency? Or did they blacklist you for some reason? And you can't hear the distant

Thanks for the reply Andrew. RF only. The nearest digipeater ignores my signal but a distant one picks it up and sends it to an igate. Actually there are three digis quite close and they all ignore

Are you using RF on your station or just an Internet connection? Bear in mind that YAAC only reports _received_ station information, and APRS-IS never sends your own station's packets back to your own

YAAC version 0-beta 196 (17 Feb 24) on a RPI 3 All is well in the outside world. Station and weather seen on YAAC map of my near neighbour. APRS.FI is also correct. My local map is showing all the

I should add that YAAC is outputting the data string though a USB to a 8 port RS-232 hub. --- Ciao baby, catch you on the flip side 73 de W3AB/GEOAFA9GB WA2LSI, KE6RJW, W6B, W7B,?AAR9AG

So is YAAC, kinda. I'm trying to push the Davis Vantage Pro+ WX station data into a KPC-3+ TNC using Weather Display through YAAC. I can see the station on CWOP and Weather Underground. So I know it

OK, never mind! I found that the YAAC window was moved up out of range of the display. Fixed it!

Oh! And I can't grab the dialog box by the title bar and move the window around either.

I tried to minimize the YAAC window on my Pi 400 and realized the doo-hickies for minimize, restore and close normally at the top right of window dialog boxes were missing. It appears I can use the

The default beacon is per-profile, so if you change profiles, you will get a different default beacon. ________________________________________ Sent: Thursday, March 7, 2024 10:01 AM To:

Andrew, Yes the profile is specified using the -profile command and it has been working fine.? Is the default beacon unique to a specific profile's configuration, or if I change the default beacon

Were you using the -profile command-line option to specify different configuration profiles? If so, you have to specify the option every time you want to use a non-default profile, otherwise YAAC will

I have a Home and Mobile profile with different settings on my portable TNCPi with display unit.? For my mobile profile I created a Mobile beacon configuration which I saved.? I was hoping that when