开云体育

They provide a short adapter cable from the mini-USB connector on the TNC board to a printer-type 'square' USB-B connector. I tried bypassing that adapter with a mini-USB to USB cable, to rule-out an

How is the Argent product wired through the radio case?

I'm used to seeing /dev/ttyUSB0, etc. in drop-down menus for port selection. If I add YAAC as a member of the group owning the 'serial port device' /dev/ttyUSB0 - or whatever it turns out to be, will

That's because USB isn't a type of TNC or remote sensor. You could have your Argent Data Tracker connected through a motherboard COM port (non-USB) if your computer was old enough to have one; the TNC

No. When you install the Argent Data Tracker the Serial Port is no longer accessible. YAAC can't communicate with a USB port?

Alinco has a serial port, no? -------------------- From: "DavidC KD4E" <qrv@...> Reply-To: <[email protected]> To: <[email protected]> Sent: April 18, 2024 at 7:57 AM EDT Subject:

Can YAAC talk to USB? I looked in File -> Configure -> Expert Mode -> Add Port but none of the drop-down options mention USB. My rig is an ALinco DR-135T MkIII with an internal Argent Data Tracker TNC

It doesn't seem to matter the number of messages. I sent a bunch of test messages and so far it is still working. I restarted last Thursday. We'll see what happens this Thursday. It's only been a

I can't be certain, but I am guessing you are exceeding your open file quota by re-opening the same .wav file without ever closing it. As such, eventually YAAC would no longer be open the file. This

After applying the latest update, I am now getting an alert as expected with an incoming message, however, it is not lasting. I participate in the APRS Thursday thing and when I send my report, I get

Hi Andrew, Ahh, that filters everything, not just the map. Didn’t realise that, thanks! Carl.

This is a trivially simple operation. Click Filter->Edit Filter. Then go to the Packet Source tab of the Edit Filter dialog, and uncheck all the sources you currently don't want to see. I put this

Hi Everyone, I have a radio port, and an APRSIS port on my YAAC instance. The APRSIS feed drowns out the RF port when viewing raw packets. Is there any way to filter the raw packet view to just seeing

Alas, that won't help; u-blox is far more recent than the DeLorme GPSs. On the other hand, if you used a u-blox GPS with GPSD, it's entirely probable that GPSD switched the GPS into u-blox proprietary

Andrew, it's a u-blox. What model i don't recall, however it is several years old.I used a puck style unit and it works with Linux, so the problem was definitely with the u-blox.With the information

Hmmm.... is this one of the old DeLorme TripMate or EarthMate GPSs? They had a characteristic of sending a model announcement string, and wouldn't do anything else until that string was echoed back by

Again, thank you for the help Andrew. Using your suggestion i found that the GPS module signs on with some kind of header and then fails to send anymore information to YAAC. While it will stream to a

Thank-you Andrew. Yes i have it set to use the GPS for my positionI'll check the View->GPS Status Thank-you again. Paul On Monday, April 1, 2024 at 03:32:13 PM PDT, Andrew P. <andrewemt@...>

Sounds plug-in now works fine. Had the speakers turned up too high. A message came in and nearly gave me a heart attack and almost blasted me out of the shack! Michael WA7SKG Andrew P. wrote on 4/1/24

next beta build#197 of YAAC ("Yet Another APRS Client"), created 2024-Apr-01 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or https://sourceforge.net/p/yetanotheraprsc changes and updates