开云体育

Good idea. Notes about installing the relevant Linux packages will be added in the build 149 version of the Bluetooth plugin.

Wow, Andrew, that is great. I look forward to seeing the results. Thank you very much for your excellent program and the support you provide. Truly extraordinary!! Joe VA3JLF Sent from Mail for

Andrew, thanks a lot for getting back to me on this. ?I wasn’t sure if I’d posted correctly and I apologize for not following up. ?After this I checked my setup again and I think I’ve figured

Hi, Joe. After much tearing of hair and taking the names of several famous mathematicians in vain :-) I have found a new algorithm for the map importer that fixes your issues on Lake Ontario (and

To avoid this issue for other users, I am making a change in the configuration wizard in build 149, such that changing your callsign will check for every port using the old callsign and ask whether

It turns out I had the delay code already in most of the TNC drivers, but the time units were screwed up, so I didn't calculate enough delay time. Fixing it all for build 149.

That's what I'm planning for the next build. Just a little bit of delay before sending the next packet, and filling in the packet when it is transmitted, rather than when it is queued. And no problem

I'll always be a YAAC enthusiast, but for a remote wx station I'll probably use aprx on a pi zero.? By copying the weather format from YAAC I've got it sending positionless weather packets and using

Ok, thanks! I’ve not understand it in the mail before. Thanks! Elia, IU2JWM

Again, the reason you're not seeing the iPhone in YAAC is that: 1. No I-gate station (including yourself) is going to transmit it to RF because the iPhone isn't sending any packets meeting rule#1 or

Hi, Is a digipiter plus I-Gate configured in wide1-1. I have the pi-tnc interface and APRS-IS interface. I don’t want to repeat my smartphone beacon trough RF. I only want to understand why I

First off, is your digipeater a digipeater-plus-I-gate, or just a digipeater? Since your iPhone is not a transmitter on ham bands, the only way your Internet-originated APRS packets are going to get

Goodmorning, I have a Digipeater on raspberry pi and pi-TNC. all works fine, except this thing: if I send a beacon from my iPhone with APRS.fi app, I can see it on APRS.fi website, but not on YAAC. I

I'm not sure. I've only tested the Bluetooth plugin on Microsoft Windows and Debian Linux (Intel processors). So I don't know which Pi processors the ARM native library will work on. Please, try it on

You said you don't know if the second option would work for pi 4, do you know if it would for the pi 3? It sounds like the second option you gave me would be the more stable if I can make that work

Greetings. You have two options here. If you bind the Mobilinkd TNC to your Pi using their Bluetooth drivers, you can use the Serial_TNC port type. However, if you have Bluetooth connectivity

Hello, I am trying to make a mobinkd tnc2 work with a raspberry pi 4 running YAAC. I am fairly new to both APRS and raspberry pi (linux) can you please help me with this? Thanks 73's Jeremy West W7TIC

Thank you Andrew.? That explains that I am entering the wrong format.? I was confused with the DDD MM.SS with DDD MM.mm.? Now entered the DDD MM.mm and it is now in the right location. I have

Spot on. Thanks. -- *Bob Nazro, W1RPQ*

The callsigns are not for the station as a whole, but for each APRS communications port (Serial_TNC, APRS-IS, etc.). The reason the old callsign keeps showing up in the wizard is because you didn't