开云体育

Hi, I have a softrock kit here waiting to be assembled. Meanwhile I have started playing with the SDR software. Since I run Linux to the exclusion of M$ Window$ I have started working with Quisk.

Yes, it looks like a mixer setting, or wrong sound card selected on HDSDR. Try HDSDR without the softrock connected. Hope this screen snap goes through. Here is mine on Win7 64 bit without a softrock

Does anyone have the applications disc for the Extigy? I have obtained a Exitgy for use with my Softrock ensemble and GSDR. But cannot get it to work as I need the application loaded before I can

I have complete a 40/30/20 meter version of the Ensemble RxTx. It is working nicely as a Receiver on my Dell desktop via sound card. I have two issues to resolve. One is to get USB sound doogle so I

Your display image reminds me what I got when there is audio feedback through the sound mixer. You must have the line input silenced in the volume control. Other mixer combinations may cause this

Did you listen to the Ensemble II line out directly with speakers or some other line input audio device plugged into the Ensemble II (i.e., not using the computer at all once you set the LO

I saw your LO post and switched over to CFGSR with the same effect, no reception. 73 K5KDT

What you see on the HDSDR display is what is coming from the soundcard USB output and then decoded by the software. You will get some kind of HDSDR display even if the rx line output is not connected

Sorry, what I meant was that tuning has no reception - there is nothing on the display to see but the picture displayed earlier - the LO and the TUNE themselves work fine.

No capability to tune - just the same display all the time

Re. my last post: it is only the Local Osc. freq that matters for listening on the rx line output (the TUNE freq in HDSDR has no effect with this test). It is probably better anyway to use CFGSR to

Perhaps we can rule out a problem with the soundcard and software decoding. If you use HDSDR to tune the LO and also the TUNE to a strong local AM broadcast station freq. with an antenna connected,

Hi Steve, Other than the site listed in your post is there a Yahoo Group or forum on your project? I'm interested in the next generation SRD and I have a homebrew all band (hf-6) transceiver using

No, I get a horrible display with no signals at all when all is connected. See attached

Original Message ----- Subject: [softrock40] Re: ensemble rx ii has a problem There is no guarantee that your sound systems will work higher than 48K without some configuration in their panels.

without 12v I have a (reasonably) flat line @ 48khz - with the spike at the LO frequency My internal card does 192/24 My external card does 96/24 Input : Softrock Si570 Input channel mode for RX: I/Q

I see all the screen shots in my email client (Apple Mail). I very rarely go to the web group page 73 de Jean-Paul AC9GH @ EN61vr99

I have a softrock ensemble Rxtx 30/20/17 that works well, and I have built the 30 meter filter for it. The Rxtx was built for me by Tony himself. But I just bought a new laptop with a weird sound

Hi! News: http://deliberateenergy.com/djvf/info.php cajn@...

Ditto, the image box is empty, I have to re open the mail in Firefox to see the attached image. Best Regards, Chris Wilson. 2E0ILY (UK)