开云体育

They have been sold. Jim W0PPA

I have two Soft Rock Ensamble RX II for sale. I have both a HF and LF model for sale. Both were built buy Tony Parks KB9YIG. I haave not used them for a while so U want to sell them. Not sure what

I setup my Ensemble II Rx last year with the in-built sound card of a very cheap Dell Windows 10 Laptop and also with a Behringer UCA202 USB sound card in a desktop Linux PC w/o in-built sound card.

I use a Soundblaster SB1095 sound card. It plugs into USB and you use a stereo 3.5 mm cable to connect to the Softrock Ensemble. You can still get the SB1095 from various places. I think Rocky is one

You can use it couple different ways , standalone , or as a panadapter. In either case you need a stereo sound card with a flat response curve . M-Audio cards seem to work the best but they are out of

James Here https://sites.google.com/site/g4zfqradio/installing-and-using-hdsdr#h.20fy2xenzndf and on the rest of that page are my notes. Once you have setup GFGSR you may use other software. 73 Alan

I have an SoftRock Ensemble RX II and do not know how to use it. Can any provide it to me. Thanks James Dale W0PPA

Hi Guy! I had a few "bounce" messages from groups.io, I normally just debounce and forget it. But another email group was saying my ISP is blocked for spamming. If it is just that group I'm not

Hi Alan. Email works. Not much being posted here. I Just built a complete RXTX I had. Physically it works great. Operating system wise. Well. On windows 11 newest. Rocky. Not so much. USB cards are

Test

Thank you Alan. I appreciate this. 73, Tryg

An overview here https://sites.google.com/site/g4zfqradio/configuring-a-softrock-sdr

Tryg, It is a long time since I wrote my pages. There is quite a lot to learn to get a RXTX going, try RX first, ignore the second soundcard. A start maybe here

Hi to all, I was gifted a FiveDash Softrock Ensemble RX/TX a number of years ago but I have never used it nor have I any knowledge of the way to do so. I need help with this. Can anybody help? TIA,

Hi Bill Are U wanting IQ .WAV files centered around 12KHz, sampled at 48Kbps for example, ie what would have been fed into a PC soundcard for a SDR ? Peter - GM8JCF https://www.g8jcf.uk/

Hi folks - [Seems like a good place to ask... but if inappropriate, please delete.] This is for testing some of my C demod code work. Need pointers to smaller I/Q .WAV files of LSB/USB, AW, & (NB)FM

Brent, The setup I used for a paddle with PowerSdr is described at https://qsl.net/ve7vv/Files/PowerSDR%20-%20instruction%20for%20paddle.pdf 73, Rod

Would it be possible for you to post your setup? I have a 2.4.4 version that connects, but I could use some ideas for xmit. Will it work with the paddle input on the radio? TNX, Brent - AB1LF

PowerSDR :) 73!

Preface: I've been using Rocky almost exclusively since about 2013 with my two RXTX radios. I works great, but the band steps vs continuous tuning is a bit of a bother and other modes would be nice