开云体育

Presumably this is an Autodesk "Eagle" board file (.brd).? If you prepared it from Eagle 9.4.x there is an icon "Generate CAM data" which does the Gerber file generation in a form acceptable directly

If you're using a newer version of Eagle, it's super simple.With the file open that you want to generate, go to upper 5th to the left , CAM processor button. Click that. It opens the CAM processor

Need help please I am trying to convert the file to Gerber files but without success Can anyone convert them for me? Many thanks Yoram

Hi Ken, interesting idea :-) Sadly my mill doesn't support ccw rotation of the spindle. Thanks anyway for the hint. Harry

Hi John, ok, then I got something wrong. I thought, your code crawls along the polygons of EAGLE and set up some sort of array or list with coordinates or verctors which then is iterated in this or

If you are use V bit cutters a far easier way might be to reverse the direction of your cutter after the first round. Regards Ken Sent: Monday, 1 July 2019 11:46 AM To: [email protected] Subject: Re:

Unfortunately, this is due to the way Eagle creates polygons. Your best bet is to find some gcode editor that will allow you to reverse the line directions in the files that pcb-gcode creates.

Hello comrades! I use pcb-gcode.ulp for some time now and get decent results, probing the copper surface with OpenCNCPilot. But I realized, that the edges of the second+ rounds are not as good as the

Edit; My other PC runs on Windows 7 . Jos

Yes, John, you are right !! Following your? instruction it works . On my Win 10 PC I user PCB-GCODE ver. 3.6.2.4 However , on my other PC I have EAGLE 7.2.0 and PCB_GCODE ver. 3.6.0.2 The problem

Hi Jos, this has nothing to do with Windows 10, the viewer pops up when generating a G-code file and is looking at the mentioned file. IF your run generates another G-code file, it tries to pop up a

I cannot solve this problem on my Windows 10 installed EAGLE 8.6.3. Can't open C:\EAGLE 8.6.3\ulp\viewer\application.windows\data\optimize_me.txt Permission denied I have absolutely no idea how to set

I don't know if you're using Windows 10 but the display settings are a little crazy.I did find a way to see the 'accept' button...portrait to landscape. But navigating the mouse is insane even just to

Must I 'shrink' the app window? Because in the 'setup screen, there's no '-'. Just an 'X' and a '?'Anyway around that?

If you only need to get to the buttons once, how about temporarily changing the screen resolution for the few seconds you need to click the button. * shrink the application window to the menu bar

Usually when the window is too large, it means the image displayed at the top,of the window couldn’t be found. You can check your install against the manual, search the forum here for people that

Wish there were hotkeys

I have the same issue... have to use an old square monitor and then i get to the buttons.

Hi, Please post latest stable entry level versions of eagle/pcb-gcode versions for mac, now that I have a functional CNC mill ?? thx jerico

Trying to setup PCBGCODE on a new machine (Windows 10). Got far enough to settings page but can't size the window to see/reach the 'accept' button.Closed it down and just tried 'run' on a board got