|
Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
Very interested in the zoom portal to get started with red node
On Jan 16, 2021, at 11:52 PM, David De Coons wo2x < RocketNJ@...> wrote:
toggle quoted message
Show quoted text
Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and
customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
I am interested I also have a zoom account if you would be interested in someone else hosting the meeting so you could have more then 40mins and also record the meeting.
toggle quoted message
Show quoted text
Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and
customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
I would be interested. ? ?Watts?
toggle quoted message
Show quoted text
On Jan 16, 2021, at 11:52 PM, David De Coons wo2x <RocketNJ@...> wrote:
?Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
Dave, I am interested in the idea. A little more instruction on Node-Red would help Immensely.?
Great idea Paul Kr5og?
toggle quoted message
Show quoted text
On Jan 16, 2021, at 10:52 PM, David De Coons wo2x <RocketNJ@...> wrote:
?Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
toggle quoted message
Show quoted text
On 17 Jan 2021, at 05:41, Paul KR5OG <paulkrog@...> wrote:
? Dave, I am interested in the idea. A little more instruction on Node-Red would help Immensely.?
Great idea Paul Kr5og? On Jan 16, 2021, at 10:52 PM, David De Coons wo2x <RocketNJ@...> wrote:
?Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
Very interested in this.? I would suggest recording the Zoom meeting and hosting somewhere so we can reference it later.? I would be willing to host it on my YouTube page (unlisted or privately) exclusive to this group with chapters and time stamps for easy reference at a later date.??
Kyle
AA0Z
|
toggle quoted message
Show quoted text
On Jan 16, 2021, at 11:52 PM, David De Coons wo2x <RocketNJ@...> wrote:
?Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
Dave, I would be delighted to participate as a student.
toggle quoted message
Show quoted text
On Jan 17, 2021, at 12:00 AM, Travis Best <tbest@...> wrote:
?
I am interested I also have a zoom account if you would be interested in someone else hosting the meeting so you could have more then 40mins and also record the meeting.
Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and
customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
Yes? Please Dave that would be a fantastic help Regards Garerth MW1DCf Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Pete Green via groups.ioSent: 17 January 2021 08:41 To: [email protected]Subject: Re: [nodered-hamradio] Interest in Zoom presentation on loading nodes, flows and dashboard customizations? ? Yes please Dave
On 17 Jan 2021, at 05:41, Paul KR5OG <paulkrog@...> wrote:
? Dave, I am interested in the idea. A little more instruction on Node-Red would help Immensely.?
On Jan 16, 2021, at 10:52 PM, David De Coons wo2x <RocketNJ@...> wrote:
?Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
Hi Dave,
?
I'm interested and thank you.
?
73
Stefan
va3ar@...
|
Dave, Absolutely! I am very interested! Anytime after 9:00AM EST.
Arne K5ARN
From: "David De Coons wo2x" <RocketNJ@...> To: [email protected]Sent: Saturday, January 16, 2021 10:52:45 PM Subject: [Special] [nodered-hamradio] Interest in Zoom presentation on loading nodes, flows and dashboard customizations?
Hi all
I am trying to gauge interest if I host a Zoom session to demonstrate the next steps after building a Node Red Pi from the WiKi. I would show how to load additional nodes, load a few flows and configure them specific to your Flex radio, and rearranging and customizing the dashboard.
I can also show some basics on how I parse data from an input and build a simple flow to show the concepts. Zoom is limited to a free 40 minute session so I would not try to put too much info in (no information overload).
The question would be a time that is convenient. I am in New Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of interest.
The goal is to encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
I'm totally on board with the idea!, I also have a Zoom Account if needed, like someone mentioned. Also I can upload the recording to my Youtube channel and varios social media as well.
I'm in.
--
______________
73 de Santiago
HI8SMX - KB8SMX
web:?
YouTube: HI8SMX?
Twitter: @hi8smx
Instagram: hi8smx
|
This is a great idea.? In fact, a series of meetings might be an add-on to this idea.? Starting with basics and progressing.? Maybe folks that have already done some work would like to share. I know there is a wealth of information on this group but being able to interact real-time is so much more helpful (to me at least)..? ?I have been using NR for a couple of years but only basic integration with my Flex.? I have been more oriented toward writing Python programs to work with the Flex but would like to learn more about NR and Flex.. I am in your time zone so anything you pick will work for me.? Thanks for thinking about this.
|
My interest would be. Which is better Win7 or Raspberry Pi? I don’t have a
Raspberry Pi yet. I do have this Win7 machine. It’s been my ham radio workhorse
for years.
?
Ed KA9EES
?
?
toggle quoted message
Show quoted text
Sent: Saturday, January 16, 2021 10:52 PM
Subject: [Special] [nodered-hamradio] Interest in Zoom presentation
on loading nodes, flows and dashboard customizations?
?
Hi
all
I am trying to gauge interest if I host a Zoom session to demonstrate
the next steps after building a Node Red Pi from the WiKi. I would show how to
load additional nodes, load a few flows and configure them specific to your Flex
radio, and rearranging and customizing the dashboard.
I can also show
some basics on how I parse data from an input and build a simple flow to show
the concepts. Zoom is limited to a free 40 minute session so I would not try to
put too much info in (no information overload).
The question would be a
time that is convenient. I am in New Jersey (U.S. Eastern time (UTC
-5:00).
Please let me know if this is of interest.
The goal is to
encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
I would recommend?using the Raspberry Pi, just to not cause any unintended problems with the Windows machine.
On Sun, Jan 17, 2021 at 1:42 PM Edward Dowdy < ka9ees@...> wrote:
My interest would be. Which is better Win7 or Raspberry Pi? I don’t have a
Raspberry Pi yet. I do have this Win7 machine. It’s been my ham radio workhorse
for years.
?
Ed KA9EES
?
?
?
Sent: Saturday, January 16, 2021 10:52 PM
Subject: [Special] [nodered-hamradio] Interest in Zoom presentation
on loading nodes, flows and dashboard customizations?
?
Hi
all
I am trying to gauge interest if I host a Zoom session to demonstrate
the next steps after building a Node Red Pi from the WiKi. I would show how to
load additional nodes, load a few flows and configure them specific to your Flex
radio, and rearranging and customizing the dashboard.
I can also show
some basics on how I parse data from an input and build a simple flow to show
the concepts. Zoom is limited to a free 40 minute session so I would not try to
put too much info in (no information overload).
The question would be a
time that is convenient. I am in New Jersey (U.S. Eastern time (UTC
-5:00).
Please let me know if this is of interest.
The goal is to
encourage users to get started tinkering with Node Red.
73
Dave wo2x
|
Thanks Alan,
?
Now I need to figure out what equipment I need to setup a Raspberry
PI.
?
Ed
?
toggle quoted message
Show quoted text
Sent: Sunday, January 17, 2021 12:50 PM
Subject: Re: [nodered-hamradio] Interest in Zoom presentation on
loading nodes, flows and dashboard customizations?
?
I would recommend using the
Raspberry Pi, just to not cause any unintended problems with the Windows
machine.
?
On Sun, Jan 17, 2021 at 1:42 PM Edward Dowdy
< ka9ees@...>
wrote:
My interest would be. Which is better Win7 or Raspberry Pi? I don’t have
a Raspberry Pi yet. I do have this Win7 machine. It’s been my ham radio
workhorse for years.
?
Ed KA9EES
?
?
?
Sent: Saturday, January 16, 2021 10:52 PM
Subject: [Special] [nodered-hamradio] Interest in Zoom
presentation on loading nodes, flows and dashboard
customizations?
?
Hi
all
I am trying to gauge interest if I host a Zoom session to
demonstrate the next steps after building a Node Red Pi from the WiKi. I would
show how to load additional nodes, load a few flows and configure them
specific to your Flex radio, and rearranging and customizing the
dashboard.
I can also show some basics on how I parse data from an
input and build a simple flow to show the concepts. Zoom is limited to a free
40 minute session so I would not try to put too much info in (no information
overload).
The question would be a time that is convenient. I am in New
Jersey (U.S. Eastern time (UTC -5:00).
Please let me know if this is of
interest.
The goal is to encourage users to get started tinkering with
Node Red.
73
Dave wo2x
|
Ed
I should add, if you install Node-Red on the Raspberry Pi, you will see the Dashboard on your Window 7's Web Browser.
Alan
|
Does that mean I can do what I need to do from my Win7 machine?
?
Ed
?
?
toggle quoted message
Show quoted text
Sent: Sunday, January 17, 2021 12:57 PM
Subject: Re: [nodered-hamradio] Interest in Zoom presentation on
loading nodes, flows and dashboard customizations?
?
Ed
I
should add, if you install Node-Red on the Raspberry Pi, you will see the
Dashboard on your Window 7's Web Browser.
Alan
|
yes, the Raspberry Pi / Node-Red, will run in the background.? All of your work will be on the Windows machine Web Browser.
On Sun, Jan 17, 2021 at 2:06 PM Edward Dowdy < ka9ees@...> wrote:
Does that mean I can do what I need to do from my Win7 machine?
?
Ed
?
?
?
Sent: Sunday, January 17, 2021 12:57 PM
Subject: Re: [nodered-hamradio] Interest in Zoom presentation on
loading nodes, flows and dashboard customizations?
?
Ed
I
should add, if you install Node-Red on the Raspberry Pi, you will see the
Dashboard on your Window 7's Web Browser.
Alan
|
Dave wo2x
Paul KR5OG
Kyle AA0Z
Bob Watson
Santiago Mejia
Ken Kayser
Edward Dowdy KA9EES