开云体育

GH RT-21 via TCP?

Kyle AA0Z All Messages By This Member #13998 A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.?? ? I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.?? ? Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.?? ? Kyle AA0Z ? ?
Dave wo2x All Messages By This Member #13999 开云体育 Hi Kyle I was away yesterday. I will be home in about an hour. Give me a call then Dave wo2x Sent from my waxed string and tin cans.? toggle quoted message Show quoted text On Jan 20, 2025, at 1:29?PM, Kyle K via groups.io <kylekrieg@...> wrote: ? A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.?? ? I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.?? ? Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.?? ? Kyle AA0Z ? ?
George / W7GES All Messages By This Member #14000 开云体育 If you two have any difficulties at all send another message in a few hours.? I have a RT-21 set up for Tornado Tuner control over TCP via Node-Red.? I remember there was some small difference connecting via TCP but can’t recall exactly.? I’m at work now and managed to crack my new laptop screen so I can’t connect remotely. ? 73, George / W7GES? toggle quoted message Show quoted text On Jan 20, 2025, at 11:34?AM, Dave wo2x via groups.io <RocketNJ@...> wrote: ?Hi Kyle I was away yesterday. I will be home in about an hour. Give me a call then Dave wo2x Sent from my waxed string and tin cans.? On Jan 20, 2025, at 1:29?PM, Kyle K via groups.io <kylekrieg@...> wrote: ? A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.?? ? I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.?? ? Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.?? ? Kyle AA0Z ? ?
Dave wo2x All Messages By This Member #14001 开云体育 Hi George There are a couple of things you need to change in the TCP request node. One is to keep connection open. Second is the end of string terminator. I have to check my notes but I should be able to help Kyle.? 73 Dave wo2x Sent from my waxed string and tin cans.? toggle quoted message Show quoted text On Jan 20, 2025, at 1:48?PM, George / W7GES via groups.io <geo.skoubis@...> wrote: ? If you two have any difficulties at all send another message in a few hours.? I have a RT-21 set up for Tornado Tuner control over TCP via Node-Red.? I remember there was some small difference connecting via TCP but can’t recall exactly.? I’m at work now and managed to crack my new laptop screen so I can’t connect remotely. ? 73, George / W7GES? On Jan 20, 2025, at 11:34?AM, Dave wo2x via groups.io <RocketNJ@...> wrote: ?Hi Kyle I was away yesterday. I will be home in about an hour. Give me a call then Dave wo2x Sent from my waxed string and tin cans.? On Jan 20, 2025, at 1:29?PM, Kyle K via groups.io <kylekrieg@...> wrote: ? A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.?? ? I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.?? ? Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.?? ? Kyle AA0Z ? ?
George / W7GES All Messages By This Member #14006 开云体育 Sounds good.? 73, George / W7GES? toggle quoted message Show quoted text On Jan 20, 2025, at 11:51?AM, Dave wo2x via groups.io <RocketNJ@...> wrote: ?Hi George There are a couple of things you need to change in the TCP request node. One is to keep connection open. Second is the end of string terminator. I have to check my notes but I should be able to help Kyle.? 73 Dave wo2x Sent from my waxed string and tin cans.? On Jan 20, 2025, at 1:48?PM, George / W7GES via groups.io <geo.skoubis@...> wrote: ? If you two have any difficulties at all send another message in a few hours.? I have a RT-21 set up for Tornado Tuner control over TCP via Node-Red.? I remember there was some small difference connecting via TCP but can’t recall exactly.? I’m at work now and managed to crack my new laptop screen so I can’t connect remotely. ? 73, George / W7GES? On Jan 20, 2025, at 11:34?AM, Dave wo2x via groups.io <RocketNJ@...> wrote: ?Hi Kyle I was away yesterday. I will be home in about an hour. Give me a call then Dave wo2x Sent from my waxed string and tin cans.? On Jan 20, 2025, at 1:29?PM, Kyle K via groups.io <kylekrieg@...> wrote: ? A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.?? ? I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.?? ? Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.?? ? Kyle AA0Z ? ?

Previous Topic Next Topic