¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nodered-Hamradio
  2. Topics

Flex Radio Auto AGC Flow.

 

I have been working on a flow to adjust the AGC Threshold setting automatically.

I followed Tim's paper on the topic: ?



Here is a link to a You-Tub of the latest version of the ?flow in action:





We have a group of "testers" giving suggestions on how to fix bug reports. ?I will upload the flow in a few days.

Alan. WA9WUD
 

¿ªÔÆÌåÓý

Alan, ?I was going through some old email and wondered if you finished the Auto AGC flow for SmartSDR?

Also, I am interested in a flow to adjust RX Gain in SmartSDR to tune to a specific Gain setting in WSJT-X ?(I run 30-40 dB). ?I typically run two WSJT-X windows using Slice Master and when I change to a different profile, I have to adjust the RX Gain setting in SmartSDR most every time. ?Are you aware of any such flow?

I presently run Shack Control which Dave helped me set up for my station. ?I am a neophyte in the development side of Node Red.

Thanks and...

73,?
Jim, W4TE
______________________
Jim Kauten, MD, W4TE
kautenmd@...
______________________



On Dec 19, 2022, at 16:41, Alan Blind, WA9WUD <a.alan.blind@...> wrote:

I have been working on a flow to adjust the AGC Threshold setting automatically.

I followed Tim's paper on the topic: ?



Here is a link to a You-Tub of the latest version of the ?flow in action:



<Screenshot 2022-12-19 at 4.35.18 PM.png>

We have a group of "testers" giving suggestions on how to fix bug reports. ?I will upload the flow in a few days.

Alan. WA9WUD
 

Hello Alan - could not tell by the dates of this correspondence and your reply if you are CURRENTLY working on an update to the AGC flow. I have your original AGC flow installed from a few years back and would love to get a current update if there are updates and improvements.? Thanks for doing this Alan.
 

Hi Craig
?
Sorry for the delay, I was working on another non ham radio project.
?
My Flex radio auto AGC flow remains he same now for several years. ?I think the new squelch feature built into the Flex firmware has overtaken the need for such a flow.
?
Alan. ?WA9WUD
 

¿ªÔÆÌåÓý

Thank you Alan for the update. Appreciate all that you do. Best. C


On Apr 25, 2025, at 5:11?AM, Alan Blind, WA9WUD via groups.io <a.alan.blind@...> wrote:

?
Hi Craig
?
Sorry for the delay, I was working on another non ham radio project.
?
My Flex radio auto AGC flow remains he same now for several years. ?I think the new squelch feature built into the Flex firmware has overtaken the need for such a flow.
?
Alan. ?WA9WUD

1 - 5 of 5