Dayton is over - time to play
|
Now that Dayton is over I am starting to play around updating some of my Node Red/Stream Deck programming. I have buttons for the 6600M and K4D. Under those are buttons showing S meter and frequency for active slice/VFO on each radio. Then under those buttons it shows current RX filter setting for active slice/VFO for each radio.
Next row over I can toggle PG XL and Tuner Genius between operate and standby. I can initiate a tune cycle and it shows which radio has the tuner in circuit. Next a dynamic button showing current rotor direction and buttons showing current antenna for each radio. Last four columns are preprogrammed azimuth buttons for rotor and AC power control. A special thanks to Mark W3II for the REST interface to FRStack and to Tormod LA9VKA for his work with SVG graphics. 73 Dave wo2x Sent from my waxed string and tin cans. |
¿ªÔÆÌåÓýThere is a zip file on the site ? It has my flows along with necessary files for Stream Deck integration At some point I should do a video of loading it all from a clean node Red install on a Pi. (when I find time) ? 73 Dave wo2x ? ? From: [email protected] <[email protected]> On Behalf Of Steven Lott Smith
Sent: Sunday, June 5, 2022 9:11 AM To: [email protected] Subject: Re: [nodered-hamradio] Dayton is over - time to play ? David |
Dave wo2x
Steven Lott Smith