Re: File /!1! Flows by Type/RADIOS/HRD_ve9gfi_2022.06.08.2130.json updated
#file-notice
Yes, to copy a node from one flow to another, click the node to be copied hit CTRL-C to copy it. Go to flow where you want it and hit CTRL-V to paste.
toggle quoted message
Show quoted text
On Jun 8, 2022, at 11:31 PM, Adrian Fewster <vk4tux@...> wrote:
?Thankyou Greg, Is it possible to copy paste a node from one flow to another ?
73
Adrian Fewster
|
Re: Dashboard Alignment Issues
Dave:
Running on a Pi3 B+. OS is Rasbian 9 (Stretch). Have two of them and they both behave identically.
--
Mark
K0LO
|
Re: Dashboard Alignment Issues
I’ll post the site section of mine later tonight. What are you running Node Red server on?
I didn’t change any fonts. I replaced the   with a space.
I’m using a Pi 4. I think it has something to do with your layout. I know my dash is set to 48x48. Will check rest later.
73 Dave wo2x
toggle quoted message
Show quoted text
On Jun 8, 2022, at 9:02 PM, Mark Wharton, K0LO <markwharton@...> wrote:
? Dave:
First, thanks for taking a look at this. I'm also using the "Node Red Theme Everywhere" setting.
Here's the contents of the Site section in the json file:
"site": {
??????????? "name": "Node-RED Dashboard",
??????????? "hideToolbar": "false",
??????????? "allowSwipe": "false",
??????????? "lockMenu": "false",
??????????? "allowTempTheme": "true",
??????????? "dateFormat": "DD/MM/YYYY",
??????????? "sizes": {
??????????????? "sx": 36,
??????????????? "sy": 36,
??????????????? "gx": 4,
??????????????? "gy": 4,
??????????????? "cx": 4,
??????????????? "cy": 6,
??????????????? "px": 0,
??????????????? "py": 0
??????????? }
??????? }
??? },
Using a group width of 3 instead of 4 results in the Group Heading "Camp K Switch" word-wrapping onto two lines, and the same for some of the button labels. Apparently you must also have to change the text size to make it fit. Is that what you did in your picture?
If I use a space in the button labels, the label wraps to the next line. Even if I enter "a b", the a is on the first line and the b is on the next line. So that's why I used   instead of a space in the labels.
I have looked at the site with Firefox, Edge, and Chromium (on the Pi). Firefox and Edge render the page identically. Chromium requires a different number of spaces to line the buttons up, but it acts like the other browsers in that the button is placed immediately to the right of the text and is not right-justified.
Mark
K0LO
|
Re: Dashboard Alignment Issues
Dave:
First, thanks for taking a look at this. I'm also using the "Node Red Theme Everywhere" setting.
Here's the contents of the Site section in the json file:
"site": {
??????????? "name": "Node-RED Dashboard",
??????????? "hideToolbar": "false",
??????????? "allowSwipe": "false",
??????????? "lockMenu": "false",
??????????? "allowTempTheme": "true",
??????????? "dateFormat": "DD/MM/YYYY",
??????????? "sizes": {
??????????????? "sx": 36,
??????????????? "sy": 36,
??????????????? "gx": 4,
??????????????? "gy": 4,
??????????????? "cx": 4,
??????????????? "cy": 6,
??????????????? "px": 0,
??????????????? "py": 0
??????????? }
??????? }
??? },
Using a group width of 3 instead of 4 results in the Group Heading "Camp K Switch" word-wrapping onto two lines, and the same for some of the button labels. Apparently you must also have to change the text size to make it fit. Is that what you did in your picture?
If I use a space in the button labels, the label wraps to the next line. Even if I enter "a b", the a is on the first line and the b is on the next line. So that's why I used   instead of a space in the labels.
I have looked at the site with Firefox, Edge, and Chromium (on the Pi). Firefox and Edge render the page identically. Chromium requires a different number of spaces to line the buttons up, but it acts like the other browsers in that the button is placed immediately to the right of the text and is not right-justified.
Mark
K0LO
|
Re: Dashboard Alignment Issues
Alan:
Here's an example of the first switch node in graphical and json formats.
--
Mark
K0LO
|
File /!1! Flows by Type/RADIOS/HRD_ve9gfi_2022.06.08.2130.json updated
#file-notice
The following files and folders have been updated in
the Files area of the [email protected] group.
By: ve9gfi@...
Description:
Ham Radio Deluxe integration. v.1.0
Requires: MQTT
Description: Polls HRD and extracts the radio's frequency. Tracks the HRD Context and self-recovers if HRD is restarted. You can set the frequency via a dashboard menu.
Developed using DM780 and a FT-847, as a part of larger Amplifier project. If you have additional commands that could be added, please DM me.
June 6 2022 - Initial
June 8 2022 - added Mode Selection
|
Re: File /!1! Flows by Type/RADIOS/HRD_ve9gfi.json updated
#file-notice
I just uploaded a new flow that includes the Mode Selection.
|
Re: File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
Hello, Dave
Please find in attached file the flow with fixed HRDCommander.
Now, then you click on a spotin HRD Logbook you will have not only
cw mode on your radio.
It is not nice solution, but it works.
I absolutely agree with you, DXCluster window in HRD Logbook is? not
something I would like to use, so I use a different flow (HRD DXCC)
for filtering spots (attached also). HRD-DXCC flow is still in
development. By click on the spot you would check confirmed
band-mode slots. Next to do is make push notification and command
for my Flex to go to the freq and the mode.
The main reason why I preferred HRD Logbook is the storage of the
log in the SQL database. I store SQL database at the dedicated
Server and? have remote access to the SQL database with my log
from any places, even from any of my Node-Red flows.
with regards,
Gennady
RM3DA
08.06.2022 2:47, David De Coons wo2x
пишет:
toggle quoted message
Show quoted text
Hi Gennady,
?
HRD Logbook still has bug that mode mapping
is not correct. Clicking on spot in HRD DX cluster 14.074 sets
CW instead of DIGIU. This is an HRD bug and not a problem with
your connector flow.
?
I have opened a support ticket with HRD.
This is why I stopped using HRD several years ago.
?
73
Dave wo2x
?
?
From: [email protected]
<[email protected]> On Behalf Of Gennady
Kupinsky
Sent: Tuesday, June 7, 2022 6:04 PM
To: [email protected]
Subject: Re: [nodered-hamradio] File /!1! Flows by
Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
?
Hi
?
TCP Node returned string already.
?
regards
Gennady
RM3DA
?
07.06.2022 22:17, David De Coons wo2x
пишет:
Hi Gennady
?
I have it working now but need to test
all the features.
I needed to add a hex to string function
after the Flex TCP CAT node.
?
Once I verify everything I will post the
updated flow.
?
Thank you
?
Dave wo2x
?
?
?
?
The following files and folders have been uploaded to the
Files area of the [email protected]
group.
- /!1! Flows by
Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json
By: Gennady Kupinsky <gek1925@...>
Description:
Node-Red flow to substitute HRD main program. You can use
HRD Log app with interface to you radio via Node-Red.
|
Re: File /!1! Flows by Type/RADIOS/HRD_ve9gfi.json updated
#file-notice
Dave,
Where do I find this source code?
Greg VE9GFI
|
Re: Dashboard Alignment Issues
OK, I loaded these in my production Pi. ? First, you don’t need   for a space character in the names. I changed it to just a space. Next, I adjusted the group width to 3 instead of 4 (buttons are set at width of 3). ? Below is screenshot on my dashboard. Everything is lined up. Note colors are not set due to no comm to the relays. ? ? Under Dashboard and Site tab I am using Node Red Theme Everywhere ? My guess is something in you CSS head settings is causing the issue. ? Look if you have any UI templates set to Added To Site <Head> Section. Try disabling them which will disable custom CSS and see if it makes a difference. If so, then something in those CSS settings is causing the alignment issue. ? Last, try a different browser or try it from your phone or tablet. ? 73 Dave wo2x ? 
? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Mark Wharton, K0LO Sent: Wednesday, June 8, 2022 9:53 AM To: [email protected]Subject: Re: [nodered-hamradio] Dashboard Alignment Issues ? Dave:
Upon checking what I sent you last time, I forgot to attach a picture to show what I see. I only sent you the flows. Here's what part of the Dashboard looks like without adding spaces following the text labels. Nothing like the right-aligned buttons in your figure above (June 4).
--
Mark K0LO
|
Re: Dashboard Alignment Issues
Mark
It looks like your switch icon is part of the label text instead of a separate icon for the switch.
Could you send me an example switch node from your flow to take a look at?
Alan. WA9WUD
|
Re: Dashboard Alignment Issues
I will check this later this morning.?
73 Dave wo2x
Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jun 8, 2022, at 9:53 AM, Mark Wharton, K0LO <markwharton@...> wrote:
? Dave:
Upon checking what I sent you last time, I forgot to attach a picture to show what I see. I only sent you the flows.
Here's what part of the Dashboard looks like without adding spaces following the text labels. Nothing like the right-aligned buttons in your figure above (June 4).
--
Mark
K0LO
|
Re: Dashboard Alignment Issues
Dave:
Upon checking what I sent you last time, I forgot to attach a picture to show what I see. I only sent you the flows.
Here's what part of the Dashboard looks like without adding spaces following the text labels. Nothing like the right-aligned buttons in your figure above (June 4).
--
Mark
K0LO
|
Re: File /!1! Flows by Type/RADIOS/HRD_ve9gfi.json updated
#file-notice
Hi Adrian,
Can you check something with HRD Logbook? Click on an FT8 spot in the DX cluster and see if it sets the radio to digital USB. I am finding it sets the radio to CW. HRD support says that is how it works and it will not be fixed. If that is the case then I will stay with my current logging program.
73
toggle quoted message
Show quoted text
On Jun 8, 2022, at 6:39 AM, Adrian Fewster <vk4tux@...> wrote:
?Greg, Making good progress, and having fun discovering what to do next. Have a combo S & dB S meter working well, lifting the inject rate and using string nodes to separate the S9 and + dB components of the string;  Will add everything possible regards Adrian
|
Re: File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
TCP-node supports string output in configuration
08.06.2022 1:25, David De Coons wo2x
пишет:
toggle quoted message
Show quoted text
Not on my end. The debug node on output of
the TCP request that communicates to Flex CAT returns a buffer
?
Dave wo2x
?
?
?
From: [email protected]
<[email protected]> On Behalf Of Gennady
Kupinsky
Sent: Tuesday, June 7, 2022 6:04 PM
To: [email protected]
Subject: Re: [nodered-hamradio] File /!1! Flows by
Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
?
Hi
?
TCP Node returned string already.
?
regards
Gennady
RM3DA
?
07.06.2022 22:17, David De Coons wo2x
пишет:
Hi Gennady
?
I have it working now but need to test
all the features.
I needed to add a hex to string function
after the Flex TCP CAT node.
?
Once I verify everything I will post the
updated flow.
?
Thank you
?
Dave wo2x
?
?
?
?
The following files and folders have been uploaded to the
Files area of the [email protected]
group.
- /!1! Flows by
Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json
By: Gennady Kupinsky <gek1925@...>
Description:
Node-Red flow to substitute HRD main program. You can use
HRD Log app with interface to you radio via Node-Red.
|
Re: File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
Hi Gennady, ? HRD Logbook still has bug that mode mapping is not correct. Clicking on spot in HRD DX cluster 14.074 sets CW instead of DIGIU. This is an HRD bug and not a problem with your connector flow. ? I have opened a support ticket with HRD. This is why I stopped using HRD several years ago. ? 73 Dave wo2x ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Gennady Kupinsky Sent: Tuesday, June 7, 2022 6:04 PM To: [email protected]Subject: Re: [nodered-hamradio] File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded #file-notice ? Hi ? TCP Node returned string already. ? regards Gennady RM3DA ? 07.06.2022 22:17, David De Coons wo2x пишет: Hi Gennady ? I have it working now but need to test all the features. I needed to add a hex to string function after the Flex TCP CAT node. ? Once I verify everything I will post the updated flow. ? Thank you ? Dave wo2x ? 
? ? ? The following files and folders have been uploaded to the Files area of the [email protected] group. - /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json
By: Gennady Kupinsky <gek1925@...> Description:
Node-Red flow to substitute HRD main program. You can use HRD Log app with interface to you radio via Node-Red.
|
Re: File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
Not on my end. The debug node on output of the TCP request that communicates to Flex CAT returns a buffer ? Dave wo2x ? ? 
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Gennady Kupinsky Sent: Tuesday, June 7, 2022 6:04 PM To: [email protected]Subject: Re: [nodered-hamradio] File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded #file-notice ? Hi ? TCP Node returned string already. ? regards Gennady RM3DA ? 07.06.2022 22:17, David De Coons wo2x пишет: Hi Gennady ? I have it working now but need to test all the features. I needed to add a hex to string function after the Flex TCP CAT node. ? Once I verify everything I will post the updated flow. ? Thank you ? Dave wo2x ? 
? ? ? The following files and folders have been uploaded to the Files area of the [email protected] group. - /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json
By: Gennady Kupinsky <gek1925@...> Description:
Node-Red flow to substitute HRD main program. You can use HRD Log app with interface to you radio via Node-Red.
|
Re: File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
Hi
TCP Node returned
string already.
regards
Gennady
RM3DA
07.06.2022 22:17, David De Coons wo2x
пишет:
toggle quoted message
Show quoted text
Hi Gennady
?
I have it working now but need to test all
the features.
I needed to add a hex to string function
after the Flex TCP CAT node.
?
Once I verify everything I will post the
updated flow.
?
Thank you
?
Dave wo2x
?
?
?
?
The following files and folders have been uploaded to the
Files area of the [email protected]
group.
By: Gennady Kupinsky <gek1925@...>
Description:
Node-Red flow to substitute HRD main program. You can use HRD
Log app with interface to you radio via Node-Red.
|
Re: File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
Hi Gennady ? I have it working now but need to test all the features. I needed to add a hex to string function after the Flex TCP CAT node. ? Once I verify everything I will post the updated flow. ? Thank you ? Dave wo2x ? 
? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Group Notification Sent: Tuesday, June 7, 2022 1:12 PM To: [email protected]Subject: [nodered-hamradio] File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded #file-notice ? The following files and folders have been uploaded to the Files area of the [email protected] group. By: Gennady Kupinsky <gek1925@...> Description:
Node-Red flow to substitute HRD main program. You can use HRD Log app with interface to you radio via Node-Red.
|
File /!1! Flows by Type/MISCELLANEOUS/flows-HRDCommander7873-20220607-2004.json uploaded
#file-notice
The following files and folders have been uploaded to
the Files area of the [email protected] group.
By: Gennady Kupinsky <gek1925@...>
Description:
Node-Red flow to substitute HRD main program. You can use HRD Log app with interface to you radio via Node-Red.
|
Dave wo2x
