开云体育

Hi Nick Thanks for giving the Microphone Level Gauge a try. I used the MQTT node to input the dBm level into the gauge flow. ?You need to set up your way to getting the gauge's input. As I recall,

Hi Alan I tried the flow, but the connection is not playing well . Mqtt node , I added my IP address and port . I used the flex discovery node information But no connection. I will give another try

I added a "low_scale" input to the environmental value list. The top bar will change color, and the bottom blue, green, yellow, and red bars will rescale as per the value ranges and low_scale setting.

The following files and folders have been updated in the Files area of the [email protected] group. * /!1! Flows by Type/SVG Based Flows/Mic Level Meter.json (

I revised the Microphone Level meter to use environmental variables to set the color ranges. Also, note.....this is NOT a Flex-specific flow. ?My SVG meter flows will work with any valid dBm value

The following files and folders have been updated in the Files area of the [email protected] group. * /!1! Flows by Type/SVG Based Flows/Mic Level Meter.json (

Thanks, Dave Good suggestion. I also do not use the Flex EQ, so now I know how to run my Mic gain up. I can add easy-to-change, environmental variables for the color ranges if there is enough

The following files and folders have been updated in the Files area of the [email protected] group. * /!1! Flows by Type/RADIOS/HRD_ve9gfi_2022.06.12.1301.json (

I moved the VFO indicator back to the RF Exciter section.? ? It was inadvertently moved to the RF output tank section of the amplifier dashboard.

Hi Adrian, I see your S meter looks different than mine.? ?I used the chart dashboard icon with the Horizontal Bar.... are you using the same, or another one? Greg

Hi Alan For those of us who do not use the internal EQ, it is fine to run the level up to zero, but not exceed zero. I suggest having blue -40 to -10, green -10 to -5, yellow -5 to 0, and red above

The following files and folders have been updated in the Files area of the [email protected] group. * /!1! Flows by Type/RADIOS/HRD_ve9gfi_2022.06.12.0904.json (

Hi Adrian, Yes - I didn't touch anything on the "get" side yesterday because I had to solve the issue of the output text type, so that the drop down menu would match properly. I just noticed the issue

Here are some screenshots and a video of the Microphone Level Meter. To make it stand out on the dashboard, I made the meter two "widgets (96 pixels) high. ?So...use a 6x2 size on your dashboard for

The following files and folders have been uploaded to the Files area of the [email protected] group. * /!1! Flows by Type/SVG Based Flows/Mic Level Meter.json (

Many thanks to Adrian! He sshed into my machine, (spending a large number of hours), and corrected the install issues. Actually he reinstalled node-red totally via npm, and that corrected all the

The following files and folders have been updated in the Files area of the [email protected] group. * /!1! Flows by Type/RADIOS/HRD_ve9gfi_2022.06.11.2235.json (

Hi Adrian, Try out the new flow.? ?I had to fix the way the HRD response was stored ... not entirely certain I'm doing this the best way, but the UTF16LE vs ASCII issue was preventing the Switch

Arnie: Which Theme are you using (on the Site tab) for the Dashboard? If you've chosen Angular Theme then it will render with a white background, regardless of your having chosen a Dark Theme. See

Going off list with this, thanks to all for putting up with this much traffic! 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst.