开云体育

Here is a sample of SPE settings which will automatically turn on the SPE amp when the software connects to your radio. If you don’t want to auto open the AMP then set that parameter to false. I

Would this be something like “/dev/ttyUSB0”? Yes. I prefer to copy the path to the sim link file for the serial cable and paste that into the FRS config file “SPE Port”. The serial cable sim

If the SPE usb uses an FTDI chip inside the amp and enumerates as a com port it should work. Dave wo2x Sent from my waxed string and tin cans.

Thanks Alan. “ You configure the Raspberry Pi serial port in the FRS configuration file using a text editor, "/usr/local/frstack/appsettings.json". ” Would this be something like

Tom You did not say, but Node-Red gets its SPE amp info from FRStack. I sent you the SPE amp flow using FRS in a separate e-mail. You configure your "Connection" flow in Node-Red to the IP address of

Hello, I want to setup my SPE amp to be viewable via FRSTack running on my Raspberry Pi (on 192.168.1.210 in this example). I have a few questions that might be more basic setup questions... When I go

I wish to take this moment to give thanks to Alan (WA9WUD) who with patience spent over 1 hour with me on the phone, on his Saturday morning helping me recover from disaster (lost 3 SD Cards, al my

The following files have been updated in the Files area of the [email protected] group. * /FRS SteppIR Yagi.json ( /g/nodered-hamradio/files/FRS SteppIR Yagi.json ) *By:*

Updated the HF-Auto Flow to include command buttons. Uses W1TR's HF-Auto as the Host to command the HF-Auto Tuner. I uploaded a separate file, "HF-Auto Network Setup" as an aid to configure HF-Auto,

The following files have been uploaded to the Files area of the [email protected] group. * /HF Auto Network Setup.png.pdf ( /g/nodered-hamradio/files/HF Auto Network

The following files have been updated in the Files area of the [email protected] group. * /HF Auto.json ( /g/nodered-hamradio/files/HF Auto.json ) *By:* Alan Blind, WA9WUD

Hi Tom, I don’t know what WiKi you saw but this group did not exist 4 years ago. Here is the link to the WiKi. /g/nodered-hamradio/wiki Welcome aboard! Let us know if you have any

Is there an updated list available of compatible Homekit products? I saw something dated 2016 reference a Wiki but I figure a lot has changed in 4 years. Thank you Tom KB5RF

Alan, Hardware and software for Auto Listener installed and working – Thanks for your work, Dave – k9uk Sent: Wednesday, September 9, 2020 6:00 PM To: [email protected] Subject:

Welcome aboard Paul! Dave wo2x Sent from my waxed string and tin cans.

Hi All, New to Nodered and this is really good stuff - I am hooked. My wife will love that I have ANOTHER thing to tinker around with. Really appreciate the work everyone is doing. 73 Paul - N4ZYM

Santigo Sorry, I misunderstood . For the WSJT-X listener, check your setting on the "Reporting" settings. I used port numbers, the same as required by the logging software I have, and duplicated in

Morning. The HF Auto flow is working fine. It’s the?Wsjtx flows that are not working. Santiago ____________73 de HI8SMX?hi8smx.onlineHI8SMX on Twitter, Instagram and YouTube

Santiago Did you set up the UDP broadcast in the HF-Auto settings? Alan [image: Screen Shot 2020-09-09 at 6.33.07 PM.png]

Hi Guys I am a comple noob here, have a little linux experience, am trying to follow David's instructions to install nodered and FRstacks. I have got to the point where nodered runs successfully in