开云体育

I have seen issues with certain devices using two flex radio's on the same network because both radios are stuck using port 4992, This causes the Flow's using UDP port 4992 to toggle between the two

Mike I see you are using Node-Red serial in and out nodes. With cables? I am having problems doing the same here. I have had success with serial to IP converters for remoting the ports. I am now

That did it Dave, interesting Flow Looks like the LPA100 uses a serial connection where the WAVE node uses Ethernet Thanks a lot guys 73's Bret WX7Y wrote:

I think he is referring to the string nodes. From Manage Pallette search for node-red-contrib-string Dave wo2x Sent: Friday, July 10, 2020 6:25 PM To: [email protected] Subject: Re:

Hi Brett Those must be from the Dashboard. If you look manage palette and search for Dashboard, you might have to install it. Is that the one? Mike

Hi Michael, Hay looking at your Node-Red Flow for the LPA100 and I don't have the NODE installed I guess for the "Power" and "SWR" could you fill me in on those Please Thanks Bret WX7Y

I addition to wanting to parse x characters after a specific phrase in a string I would like to be able to do the same with a buffer stream. Thanks Dave wo2x Sent from Mail for Windows 10 Sent:

I do have the string node installed. I probably should have also been a little more specific. If I send the UDP listener to buffer I get a hex stream Meter 16 shows up as 00 16 d ce I want to parse

Dave Did you try the string node? https://flows.nodered.org/node/node-red-contrib-string It is not installed by default. It has about 20 parsing options. Mike wrote:

I asked Larry about how the LP100A peak reading works. Very interesting. This is why some peak meters don't actually catch the peak as you don't sample at the right time. Mike va3mw *It determines

Hi All, hoping the collective brainpower of the group may have a solution. Sometimes I get stuck on the simple things. I need to work on displaying TX power setting for current band and looking for a

Has anyone played with this yet? https://tech.scargill.net/lcd-display-for-node-red/ [image: image.png] Mike va3mw

I'm still working on it. The key was making sure I don't corrupt the read of the initial data. I'm adding more display info. I took out the Gate since the LP100A handles clearing the display nicely.

Interesting. I have to Look at the WaveNode manual. This might be a good starting point for Bret and his meter. I’ll check it today. Mike, can you post the code? I have seen the internal meter info

Thanks to Alan and Dave for their help! This is Just a start on my station's NodeRed and looks kind of caveman compared to the others on here, I have very little time to work on this project right now

When you bind to a client you receive a lot more info including current band. There is a LOT of data and parsing it will be tricky. I’d take a look at the data but doing an emergency road trip to

I’ve look for band data and only found TX?frequency info but not band per se. Looking into converting freq to band if not. Santiago ____________73 de HI8SMX?hi8smx.onlineHI8SMX on Twitter,

I get band data from the KPA1500. You can also get it when you subscribe to a client. Dave wo2x Sent: Thursday, July 9, 2020 5:25 PM To: [email protected] Subject: Re: [nodered-hamradio]

I see. There should be a direct way to get "band" from radio to send the MQTT for the led nodes. I will pour some coffee and read about it. Thanks Santiago ______________ 73 de Santiago HI8SMX web:

I'm not sure if it is being simple or lazy. Mike