开云体育

I’d contribute. If you build it, they will come!

Here is the link to the Zoom I hosted. Kyle https://youtu.be/rq8EEiv9xPA

The following files have been uploaded to the Files area of the [email protected] group. * /VK1OO Flows/VK1OO 2021_08_08 Pi Monitoring flows.json (

It sounds like the EEPROM on the Pi4 needs repaired, it is a simple process and here is link to a Youtube video describing how to do that. https://youtu.be/Pxwws-nLQ-A -- Mark - K8MHW

On the Pi4 you can create an image by using the built-in system backup and copier utility on the Pi's desktop, It can easily copy to a USB thumb drive or to a USB SDCard adapter. This will also let

You will need to update the board’s firmware. Also check the SD card if is not corrupted. Here is the pre compiled binaries https://github.com/raspberrypi/firmware 73, Ez

Nick You might tinker with the width setting and spread it out wide. Here is an example of what I'm working on right now. It's a full on radio system controller for a DXpedition station in a box,

Santiago Were you able to resolve your problem? ?If you need a zoom, for help, we can arrange. As for downloading new Raspberry Pi images, I have had good results using the official Raspberry Imager.

GM All I wanted to thank Dave WO2X for all the work he did on the QST article for NodeRed that just was published. Nice job!!! With that article, there is a reference to this group, so I expect a

I really wish Node Red would put in better dashboard support.? Lining up groups and spacing them where you want is not obvious.? The current setup is great if you have one row of groupings, but once

I haven’t tried it but the default dash is 48x48. You can change that. Also saw an interesting alternative for a dash for those that know web page programming. Looks a lot more powerful with full

Hi The dash board has limited space , has anyone find a way to fill the whole dashboard? with scroll bar to the side . Instead having links can i have everything on page on ? -- Nick W7NIK

Domenick For my GPIO based relay flow, to "initialize" a relay on Node-Red restart, just change one of the "Test" inject nodes to inject one second after start. ?This will position the relay and

For automatic just use an object node to send Boolean false. Connect it to all the Pi relay GPIO outs. Set the inject to send once after 5 second then interval to never. When you start the Node Red

Hello.? My goal is to initialize relays at the startup of the RasPi.? Automatically,, when RasPi starts up would be great.? But I can work with a solution which would be a dashboard button, called

Hi Nick.? Yes I did add a map like Dave did.? I have uploaded my most recent versions of Rotator_20210806.json and Map_Interface_20210806.json to my wb0smx_Flows/ERC_AzMap directory (Note** Moved to

wb0smx <rdpecken@...> added folder */wb0smx Flows/ERC_AzMap* --- The following files have been uploaded to the Files area of the [email protected] group. * /wb0smx

Working on Mike's idea of a global MQTT broker to share data. Is there any interest? If so, what data is of interest? ?Seems like data similar to what is now "spotted" on DX servers would be a

Does anyone have a working flow to control and load frequency data to an Alpha 87a amplifier?

Randy thank you for the flow, did you add an Azimuthal map . I was trying? to add a? map like? Dave did, but his flow required? PstrotatorAZ . any ideas ? I works great , -- Nick W7NIK